Original Magic Shark Soul Eater Hand Spinner Fidget Toy EDC $25.99
The Original Magic Shark Soul Eater Hand Spinner is constructed from stainless steel. The spinner is a small spinning device designed to keep your hands busy and your mind focused. It is pocket sized and can be spun in one hand by using the other hand to rapidly spin it from small continuous strikes. Great for people with Fidgety hands, ADHD, Anxiety & OCD sufferers. The bearing is R188 and made from stainless steel, with size of 12.6 x 4.7mm (diameter x height).This item also has many color to choose.
Monday, July 31, 2017
Original Freemax Replacement Bubble PEI Tank for Fire Luke Sub Ohm Tank
Original Freemax Replacement Bubble PEI Tank for Fire Luke Sub Ohm Tank $5.69
The Original Freemax Replacement Bubble Tank is made from PEI with 4ml capacity. It is designed for Freemax FireLuke Sub Ohm Tank.This item also has a 5ml version to choose.
The Original Freemax Replacement Bubble Tank is made from PEI with 4ml capacity. It is designed for Freemax FireLuke Sub Ohm Tank.This item also has a 5ml version to choose.
Original Freemax Replacement Bubble Glass Tank for Fire Luke Sub Ohm Tank
Original Freemax Replacement Bubble Glass Tank for Fire Luke Sub Ohm Tank $1.79
The Original Freemax Replacement Bubble Tank is made from glass with 4ml capacity. It is designed for Freemax FireLuke Sub Ohm Tank.This item also has a 5ml version to choose.
The Original Freemax Replacement Bubble Tank is made from glass with 4ml capacity. It is designed for Freemax FireLuke Sub Ohm Tank.This item also has a 5ml version to choose.
Original Freemax Duodenary Coil Head for Fire Luke Sub Ohm Tank
Original Freemax Duodenary Coil Head for Fire Luke Sub Ohm Tank $14.99
The Original Freemax Fire Luke Duodenary Coil is designed for Freemax FireLuke Sub Ohm Tank. It comes with 12 pre-built coils in the coil head and features 0.15ohm resistance, supporting wattage output from 80 watts to 180 watts. This product comes with 3 PCS in 1 pack.
The Original Freemax Fire Luke Duodenary Coil is designed for Freemax FireLuke Sub Ohm Tank. It comes with 12 pre-built coils in the coil head and features 0.15ohm resistance, supporting wattage output from 80 watts to 180 watts. This product comes with 3 PCS in 1 pack.
Original Freemax Sextuple Coil Head for Fire Luke Sub Ohm Tank
Original Freemax Sextuple Coil Head for Fire Luke Sub Ohm Tank $11.99
The Original Freemax Fire Luke Sextuple Coil is designed for Freemax FireLuke Sub Ohm Tank. It comes with 6 pre-built coils in the coil head and features 0.15ohm resistance, supporting wattage output from 60 watts to 140 watts. This product comes with 3 PCS in 1 pack.
The Original Freemax Fire Luke Sextuple Coil is designed for Freemax FireLuke Sub Ohm Tank. It comes with 6 pre-built coils in the coil head and features 0.15ohm resistance, supporting wattage output from 60 watts to 140 watts. This product comes with 3 PCS in 1 pack.
ShenRay Kalora 2 RTA Knurled Rebuildable Tank Atomizer Clone
ShenRay Kalora 2 RTA Knurled Rebuildable Tank Atomizer Clone $27.99
The ShenRay Kalora 2 RTA Clone is constructed from stainless steel in 23mm diameter. The top cap is knurled. The side adjustable airflow brings direct inflow to the coils. It is easy to refill with top filling design. The deck comes with two posts for both single and dual coils build. The tank can hold about 4ml e-juice. The RTA comes with ABS 810 wide bore drip tip.
The ShenRay Kalora 2 RTA Clone is constructed from stainless steel in 23mm diameter. The top cap is knurled. The side adjustable airflow brings direct inflow to the coils. It is easy to refill with top filling design. The deck comes with two posts for both single and dual coils build. The tank can hold about 4ml e-juice. The RTA comes with ABS 810 wide bore drip tip.
ShenRay Kalora 2 RTA Rebuildable Tank Atomizer Clone
ShenRay Kalora 2 RTA Rebuildable Tank Atomizer Clone $27.99
The ShenRay Kalora 2 RTA Clone is constructed from stainless steel in 23mm diameter. The side adjustable airflow brings direct inflow to the coils. It is easy to refill with top filling design. The deck comes with two posts for both single and dual coils build. The tank can hold about 4ml e-juice. The RTA comes with ABS 510 drip tip.
The ShenRay Kalora 2 RTA Clone is constructed from stainless steel in 23mm diameter. The side adjustable airflow brings direct inflow to the coils. It is easy to refill with top filling design. The deck comes with two posts for both single and dual coils build. The tank can hold about 4ml e-juice. The RTA comes with ABS 510 drip tip.
Original 528 Custom Goon 1.5 RDA Rebuildable Dripping Atomizer
Original 528 Custom Goon 1.5 RDA Rebuildable Dripping Atomizer Original Price $59.99,Now Only $43.99
The best RDA from 528 Custom, the Goon RDA has upgraded and now comes the Goon 1.5 RDA! The Goon 1.5 RDA is 24mm in diameter. The design improves a lot than the original Goon. It features domed inner cap, Cyclops airflow for better adjustment of airflow. The posts are wider and thicker, and most of the bridge is removed to enhance strength for bending and spinning. More clamping space is available because of 1.5mm taller screws. Goon 1.5 is hybrid safe and the positive and negative bridges can be easily replaceable. It comes with 810 wide bore drip tip.This item also has many color to choose.
The best RDA from 528 Custom, the Goon RDA has upgraded and now comes the Goon 1.5 RDA! The Goon 1.5 RDA is 24mm in diameter. The design improves a lot than the original Goon. It features domed inner cap, Cyclops airflow for better adjustment of airflow. The posts are wider and thicker, and most of the bridge is removed to enhance strength for bending and spinning. More clamping space is available because of 1.5mm taller screws. Goon 1.5 is hybrid safe and the positive and negative bridges can be easily replaceable. It comes with 810 wide bore drip tip.This item also has many color to choose.
Original Vandy Vape MESH RDA Rebuildable Dripping Atomizer w/ BF Pin
Original Vandy Vape MESH RDA Rebuildable Dripping Atomizer w/ BF Pin $22.99
The Original Vandy Vape MESH RDA is 24mm atomizer with innovative design to be compatible with Mesh wire and standard coil. The invisible clamp style postless deck can rebuild with single coil, dual coils and single mesh wire. By inserting the tails into the slots and locking with side slotted screws, it is easy to finish the building. The RDA also features side adjustable airflow and comes with Ultem drip tip and Doc tip. This RDA comes with bottom feeder pin.This item also has many color to choose.
The Original Vandy Vape MESH RDA is 24mm atomizer with innovative design to be compatible with Mesh wire and standard coil. The invisible clamp style postless deck can rebuild with single coil, dual coils and single mesh wire. By inserting the tails into the slots and locking with side slotted screws, it is easy to finish the building. The RDA also features side adjustable airflow and comes with Ultem drip tip and Doc tip. This RDA comes with bottom feeder pin.This item also has many color to choose.
Original Wotofo Flow Subtank Sub Ohm Tank Atomizer
Original Wotofo Flow Subtank Sub Ohm Tank Atomizer $26.99
The Original Wotofo Flow Subtank, coming with 4ml capacity, is a 24mm diameter sub ohm tank. With a silicone plug, the capacity can be changed to 2ml. The Flow Subtank features top filling, which is convenient, and silver plated electrode post for better conductivity. The adjustable bottom airflow brings great flavor and dense clouds. The included coil is 0.25ohm resistance, supporting wattage output from 30 watts to 60 watts.
The Original Wotofo Flow Subtank, coming with 4ml capacity, is a 24mm diameter sub ohm tank. With a silicone plug, the capacity can be changed to 2ml. The Flow Subtank features top filling, which is convenient, and silver plated electrode post for better conductivity. The adjustable bottom airflow brings great flavor and dense clouds. The included coil is 0.25ohm resistance, supporting wattage output from 30 watts to 60 watts.
Sunday, July 30, 2017
9-Hole Replacement Base for AV Able / Timekeeper Style Mechanical Mod
9-Hole Replacement Base for AV Able / Timekeeper Style Mechanical Mod $5.99
The replacement base is made from stainless steel with 24.5mm in outer diameter. The inner diameter is 21.5mm. It features night venting holes on the side. It is suitable for AV series mechanical mod Clone on 3FVAPE.This item also has many color to choose.
The replacement base is made from stainless steel with 24.5mm in outer diameter. The inner diameter is 21.5mm. It features night venting holes on the side. It is suitable for AV series mechanical mod Clone on 3FVAPE.This item also has many color to choose.
6-Hole Replacement Base for AV Able / Timekeeper Mechanical Mod Clone
6-Hole Replacement Base for AV Able / Timekeeper Mechanical Mod Clone $5.99
The replacement base is made from stainless steel with 24.5mm in outer diameter. The inner diameter is 21.5mm. It features six venting holes on the side. It is suitable for AV series mechanical mod Clone on 3FVAPE.This item also has many color to choose.
The replacement base is made from stainless steel with 24.5mm in outer diameter. The inner diameter is 21.5mm. It features six venting holes on the side. It is suitable for AV series mechanical mod Clone on 3FVAPE.This item also has many color to choose.
SXK Le Concorde RDA Rebuildable Dripping Atomizer Clone with BF Pin
SXK Le Concorde RDA Rebuildable Dripping Atomizer Clone with BF Pin $10.99 after add to cart
The SXK Le Concorde BF RDA Clone is constructed from 316 stainless steel in 22mm diameter. The RDA features side adjustable airflow and two posts build deck. The Le Concorde Style BF RDA supports either a horizontal single coil or a double micro coil. The RDA is compatible with 510 drip tip. This RDA comes with bottom feeder pin.
The SXK Le Concorde BF RDA Clone is constructed from 316 stainless steel in 22mm diameter. The RDA features side adjustable airflow and two posts build deck. The Le Concorde Style BF RDA supports either a horizontal single coil or a double micro coil. The RDA is compatible with 510 drip tip. This RDA comes with bottom feeder pin.
Original ADVKEN CP RTA Rebuildable Tank Atomizer
Original ADVKEN CP RTA Rebuildable Tank Atomizer $24.99
The Original ADVKEN CP RTA is constructed from stainless and Pyrex glass, with 24mm diameter and 3.5ml juice capacity. It features top filling design and adjustable bottom direct airflow. The deck comes with two posts, and uses springs in the post holes for easier coil screwed. CP RTA comes a removable 810 wide bore drip tip, which is heat insulated.This item also has many color to choose.
The Original ADVKEN CP RTA is constructed from stainless and Pyrex glass, with 24mm diameter and 3.5ml juice capacity. It features top filling design and adjustable bottom direct airflow. The deck comes with two posts, and uses springs in the post holes for easier coil screwed. CP RTA comes a removable 810 wide bore drip tip, which is heat insulated.This item also has many color to choose.
Coppervape Tilemahos Armed RTA Rebuildable Tank Atomizer Clone
Coppervape Tilemahos Armed RTA Rebuildable Tank Atomizer Clone $21.89
The Coppervape Tilemahos Armed RTA Clone is constructed from stainless steel in 22mm diameter. The inner tank is PC made with SS sleeve wrapped around it, holding 4ml capacity. It is possible to choose between an air hole of 1.5 mm, 2.5 mm or 3.5 mm as required by adjusting the AFC ring. The Tilemahos is suitable for both mouth-to-lung and direct lung. The two posts deck supports single coil and the positive terminal is exchangeable. The RTA comes with 510 drip tip.This item also has many color to choose.
The Coppervape Tilemahos Armed RTA Clone is constructed from stainless steel in 22mm diameter. The inner tank is PC made with SS sleeve wrapped around it, holding 4ml capacity. It is possible to choose between an air hole of 1.5 mm, 2.5 mm or 3.5 mm as required by adjusting the AFC ring. The Tilemahos is suitable for both mouth-to-lung and direct lung. The two posts deck supports single coil and the positive terminal is exchangeable. The RTA comes with 510 drip tip.This item also has many color to choose.
Reload 1.5 RDA Clone Rebuildable Dripping Atomizer
Reload 1.5 RDA Clone Rebuildable Dripping Atomizer $8.59
The Reload 1.5 RDA Clone is constructed from stainless steel in 24mm diameter. It features two posts large build deck for both single and dual coil building, coming with direct bottom airflow to the coils. The protruding 510 pin makes it compatible with hybrid mod. The RDA comes with 810 wide bore drip tip.This item also has many color to choose.
The Reload 1.5 RDA Clone is constructed from stainless steel in 24mm diameter. It features two posts large build deck for both single and dual coil building, coming with direct bottom airflow to the coils. The protruding 510 pin makes it compatible with hybrid mod. The RDA comes with 810 wide bore drip tip.This item also has many color to choose.
Kindbright Reload 1.5 RDA Rebuildable Dripping Atomizer Clone
Kindbright Reload 1.5 RDA Rebuildable Dripping Atomizer Clone $10.99
The Kindbright Reload 1.5 RDA Clone is constructed from stainless steel in 24mm diameter. It features two posts large build deck for both single and dual coil building, coming with direct bottom airflow to the coils. The protruding 510 pin makes it compatible with hybrid mod. The RDA comes with 810 wide bore drip tip.This item also has many color to choose.
The Kindbright Reload 1.5 RDA Clone is constructed from stainless steel in 24mm diameter. It features two posts large build deck for both single and dual coil building, coming with direct bottom airflow to the coils. The protruding 510 pin makes it compatible with hybrid mod. The RDA comes with 810 wide bore drip tip.This item also has many color to choose.
Original Amphisbaena RDA Rebuildable Dripping Atomizer
Original Amphisbaena RDA Rebuildable Dripping Atomizer $19.99
The Original Amphisbaena RDA is constructed from alluminum alloy (cap) and stainless steel (base). It features side adjustable airflow. The build deck is 24K gold plated with two posts. Each post has one slot screw on top. The RDA comes with a PEI 810 wide bore drip tip.This item also has many color to choose.
The Original Amphisbaena RDA is constructed from alluminum alloy (cap) and stainless steel (base). It features side adjustable airflow. The build deck is 24K gold plated with two posts. Each post has one slot screw on top. The RDA comes with a PEI 810 wide bore drip tip.This item also has many color to choose.
Vape Breed Atty 24 RDA Rebuildable Dripping Atomizer Clone
Vape Breed Atty 24 RDA Rebuildable Dripping Atomizer Clone $7.99
The Vape Breed Atty 24 RDA Clone is constructed from stainless steel in 24mm diameter. It features side adjustable airflow and bottom airflow. The deck features two clamp style posts with four holes. Each post has two slot screws on top. It is easy to build both single and dual coils. The 510 protruding pin makes it compatible with hybrid mods. The RDA comes with removable POM wide bore drip tip.This item also has many color to choose.
The Vape Breed Atty 24 RDA Clone is constructed from stainless steel in 24mm diameter. It features side adjustable airflow and bottom airflow. The deck features two clamp style posts with four holes. Each post has two slot screws on top. It is easy to build both single and dual coils. The 510 protruding pin makes it compatible with hybrid mods. The RDA comes with removable POM wide bore drip tip.This item also has many color to choose.
Vape Breed Atty V4 RDA Rebuildable Dripping Atomizer Clone
Vape Breed Atty V4 RDA Rebuildable Dripping Atomizer Clone $8.59
The Vape Breed Atty V4 RDA Clone is constructed from stainless steel in 24mm diameter. The top cap is beveled to fit the drip tip. It features side adjustable airflow and bottom direct airflow. The deck features two posts with four holes. Each post has two slot screws on top. It is easy to build both single and dual coils. The 510 protruding pin makes it compatible with hybrid mods. The RDA comes with removable 810 wide bore drip tip.This item also has many color to choose.
The Vape Breed Atty V4 RDA Clone is constructed from stainless steel in 24mm diameter. The top cap is beveled to fit the drip tip. It features side adjustable airflow and bottom direct airflow. The deck features two posts with four holes. Each post has two slot screws on top. It is easy to build both single and dual coils. The 510 protruding pin makes it compatible with hybrid mods. The RDA comes with removable 810 wide bore drip tip.This item also has many color to choose.
EL Thunder Hybrid Mechanical Mod Clone
EL Thunder Hybrid Mechanical Mod Clone $17.89
The El Thunder Style Mechanical Mod is constructed from stainless steel in 26mm diameter. The EL is a bevel in the middle of the body, giving it a very comfortable feel. The thunder features 510 hybrid connection with beveled edge, on top of which the atomizer will look great. The mod has spring bottom fire button. It is powered by 1 x 18650 battery (not included).This item also has many color to choose.
The El Thunder Style Mechanical Mod is constructed from stainless steel in 26mm diameter. The EL is a bevel in the middle of the body, giving it a very comfortable feel. The thunder features 510 hybrid connection with beveled edge, on top of which the atomizer will look great. The mod has spring bottom fire button. It is powered by 1 x 18650 battery (not included).This item also has many color to choose.
Friday, July 28, 2017
SXK Replacement Tank Sleeve + Drip Tip for SOLO RDA
SXK Replacement Tank Sleeve + Drip Tip for SOLO RDA $7.00
The replacement top cap and drip tip is made from PEI and suitable for SXK SOLO RDA Clone.
The replacement top cap and drip tip is made from PEI and suitable for SXK SOLO RDA Clone.
810 Drip Tip for SMOK TFV8 / TFV8 Big Baby / TFV12 Tank
810 Drip Tip for SMOK TFV8 / TFV8 Big Baby / TFV12 Tank $3.99
The 810 drip tip is made from Turquoise mouthpiece and stainless steel base in 17mm overall diameter and 14mm height. The connector is 12.5mm in diameter. It is suitable for SMOK TFV12 tank, TFV8 tank, TFV8 Big Baby Tank, Goon RDA, Goon RTA, Lost Art Goon RDA, Goon LP RDA, Kennedy 24 / 25 RDA, Battle RDA, Mask RDA, Kryten RDA, Mad Dog RDA, Mask RDA, CSMNT Cosmonaut RDA, Unholy RDA, Apocalypse GEN 2 RDA, Reload RDA, Mini Battle RDA, Avid Lyfe Captain Cap II, Sith RDA.This item also has many color to choose.
The 810 drip tip is made from Turquoise mouthpiece and stainless steel base in 17mm overall diameter and 14mm height. The connector is 12.5mm in diameter. It is suitable for SMOK TFV12 tank, TFV8 tank, TFV8 Big Baby Tank, Goon RDA, Goon RTA, Lost Art Goon RDA, Goon LP RDA, Kennedy 24 / 25 RDA, Battle RDA, Mask RDA, Kryten RDA, Mad Dog RDA, Mask RDA, CSMNT Cosmonaut RDA, Unholy RDA, Apocalypse GEN 2 RDA, Reload RDA, Mini Battle RDA, Avid Lyfe Captain Cap II, Sith RDA.This item also has many color to choose.
Original SMOKTech SMOK OSUB King 220W TC VW Variable Wattage Mod + TFV8 Big Baby Tank Kit
Original SMOKTech SMOK OSUB King 220W TC VW Variable Wattage Mod + TFV8 Big Baby Tank Kit $52.99
This kit includes OSUB King 220W mod and TFV8 Big Baby Tank. Mod: OSUB King 220W mod, brand new TC VW mod from SMOKTech, the max output power of which can be up to 220W, and provides two modes for you. Temp Mode can enhance consistency and taste of every puff. Watt Mode is perfect for cloud chasing. The clearly OLED screen combines with entirely new operation interface. More vaping data for you, such as VW / TC MODE, vaping effect, voltage, battery life, resistance value etc. OSUB King 220W mod is powered by 2 x 18650 batteries, which can meet up with your demands for long battery run-time and allow you to enjoy vaping experience. The the magnetic battery cover design allows you to quickly replace batteries without tools.This item also has many color to choose. Tank The TFV8 Big Baby is a bigger baby beast that let you enjoy more clouds and more fun. It adopts the same baby beast engines: V8 Baby-X4 Core, V8 Baby-T6 Core and V8 Baby RBA. This tank comes with 5ml capacity.
This kit includes OSUB King 220W mod and TFV8 Big Baby Tank. Mod: OSUB King 220W mod, brand new TC VW mod from SMOKTech, the max output power of which can be up to 220W, and provides two modes for you. Temp Mode can enhance consistency and taste of every puff. Watt Mode is perfect for cloud chasing. The clearly OLED screen combines with entirely new operation interface. More vaping data for you, such as VW / TC MODE, vaping effect, voltage, battery life, resistance value etc. OSUB King 220W mod is powered by 2 x 18650 batteries, which can meet up with your demands for long battery run-time and allow you to enjoy vaping experience. The the magnetic battery cover design allows you to quickly replace batteries without tools.This item also has many color to choose. Tank The TFV8 Big Baby is a bigger baby beast that let you enjoy more clouds and more fun. It adopts the same baby beast engines: V8 Baby-X4 Core, V8 Baby-T6 Core and V8 Baby RBA. This tank comes with 5ml capacity.
Kennedy V5 RDA Rebuildable Dripping Atomizer Clone with BF Pin
Kennedy V5 RDA Rebuildable Dripping Atomizer Clone with BF Pin $10.99
The Kennedy V5 RDA Clone is constructed from stainless steel in 24mm diameter. The RDA comes with dual adjustable airflow. The adjustable top cap and four top air slots work as top airflow system, and the dual bottom air slots work as bottom airflow system. The two post deck is friendly, with enough space for building coils more easily. This RDA comes with bottom feeder pin.
The Kennedy V5 RDA Clone is constructed from stainless steel in 24mm diameter. The RDA comes with dual adjustable airflow. The adjustable top cap and four top air slots work as top airflow system, and the dual bottom air slots work as bottom airflow system. The two post deck is friendly, with enough space for building coils more easily. This RDA comes with bottom feeder pin.
Original Wotofo Viper RTA Rebuildable Tank Atomizer
Original Wotofo Viper RTA Rebuildable Tank Atomizer $23.99
The Viper RTA is a newly designed tank from Wotofo, coming with 24mm diameter and 3ml capacity glass tank. Top filling design brings much convenience and the PEI drip tip can prevent over-heating. The lockable juice tank makes leaking not a problem anymore. Two adjustable air slots on the bottom bring direct airflow to coils. It is easy to build single coil on the two-post deck. Viper RTA will surely give you amazing flavor with massive vapor production.This item also has many color to choose.
The Viper RTA is a newly designed tank from Wotofo, coming with 24mm diameter and 3ml capacity glass tank. Top filling design brings much convenience and the PEI drip tip can prevent over-heating. The lockable juice tank makes leaking not a problem anymore. Two adjustable air slots on the bottom bring direct airflow to coils. It is easy to build single coil on the two-post deck. Viper RTA will surely give you amazing flavor with massive vapor production.This item also has many color to choose.
Original Oumier WASP Nano RDTA Rebuildable Dripping Tank Atomizer
Original Oumier WASP Nano RDTA Rebuildable Dripping Tank Atomizer $21.99
The Original Oumier WASP Nano RDTA is a new tank designed based on WASP Nano RDA, and comes with a 2ml tank to become a rebuildable dripping tank atomizer. WASP Nano RDTA features 22mm diameter, large build deck for single coil building, and direct side airflow design to ensure fabulous vaping experience. This RDTA is compatible with 510 drip tip.This item also has many color to choose.
The Original Oumier WASP Nano RDTA is a new tank designed based on WASP Nano RDA, and comes with a 2ml tank to become a rebuildable dripping tank atomizer. WASP Nano RDTA features 22mm diameter, large build deck for single coil building, and direct side airflow design to ensure fabulous vaping experience. This RDTA is compatible with 510 drip tip.This item also has many color to choose.
Scud Mod Gen 2.0 Hybrid Mechanical Box Mod Clone
Scud Mod Gen 2.0 Hybrid Mechanical Box Mod Clone $23.99
The Scud Mod Gen 2.0 Mechanical Box Mod Clone is construction from copper and full black delrin insulated body. The delrin body features slotted vent holes. The mod features 510 hybrid top cap, all copper connection and side fire button. It is powered by 1 x 18650 battery (not included).
The Scud Mod Gen 2.0 Mechanical Box Mod Clone is construction from copper and full black delrin insulated body. The delrin body features slotted vent holes. The mod features 510 hybrid top cap, all copper connection and side fire button. It is powered by 1 x 18650 battery (not included).
Original SNOWWOLF 200W C 235W TC VW Variable Wattage Box Mod
Original SNOWWOLF 200W C 235W TC VW Variable Wattage Box Mod $55.99
The Original SNOWWOLF 200W C TC VW Mod is a simple but elegant mod with max output wattage 235W. It is powered by dual 18650 high drain batteries. The adjustable temperature range is 100~350'C / 212~662'F. Comes with multiple working modes, including PWR, Ni / TI, SS316, DIY1 / DIY2, SNOWWOLF 200W C will be a great choice for your vaping.This item also has many color to choose.
The Original SNOWWOLF 200W C TC VW Mod is a simple but elegant mod with max output wattage 235W. It is powered by dual 18650 high drain batteries. The adjustable temperature range is 100~350'C / 212~662'F. Comes with multiple working modes, including PWR, Ni / TI, SS316, DIY1 / DIY2, SNOWWOLF 200W C will be a great choice for your vaping.This item also has many color to choose.
Original SMOKTech SMOK OSUB King 220W TC VW Variable Wattage Box Mod
Original SMOKTech SMOK OSUB King 220W TC VW Variable Wattage Box Mod $39.99
OSUB King 220W mod, brand new TC VW mod from SMOKTech, the max output power of which can be up to 220W, and provides two modes for you. Temp Mode can enhance consistency and taste of every puff. Watt Mode is perfect for cloud chasing. The clearly OLED screen combines with entirely new operation interface. More vaping data for you, such as VW / TC MODE, vaping effect, voltage, battery life, resistance value etc. OSUB King 220W mod is powered by 2x18650 batteries, which can meet up with your demands for long battery run-time and allow you to enjoy vaping experience. The the magnetic battery cover design allows you to quickly replace batteries without tools.This item also has many color to choose.
OSUB King 220W mod, brand new TC VW mod from SMOKTech, the max output power of which can be up to 220W, and provides two modes for you. Temp Mode can enhance consistency and taste of every puff. Watt Mode is perfect for cloud chasing. The clearly OLED screen combines with entirely new operation interface. More vaping data for you, such as VW / TC MODE, vaping effect, voltage, battery life, resistance value etc. OSUB King 220W mod is powered by 2x18650 batteries, which can meet up with your demands for long battery run-time and allow you to enjoy vaping experience. The the magnetic battery cover design allows you to quickly replace batteries without tools.This item also has many color to choose.
Thursday, July 27, 2017
Original Joyetech Atopack Penguin SE 50W 2000mAh E-Cigarette Starter Kit
Original Joyetech Atopack Penguin SE 50W 2000mAh E-Cigarette Starter Kit $27.99
The special edition of the ATOPACK PENGUIN is lighter and more colorful. The ATOPACK PENGUIN SE is a more attractive but still compact starter kit with the most penguin-like appearance ever. The innovative JVIC system takes a horizontal approach in discovering the original flavor with a brilliant ceramic cradle. The ATOPACK cartridge is refillable with a huge 8.8ml e-liquid capacity, which will definitely offer you enjoyment.This item also has many color to choose.
The special edition of the ATOPACK PENGUIN is lighter and more colorful. The ATOPACK PENGUIN SE is a more attractive but still compact starter kit with the most penguin-like appearance ever. The innovative JVIC system takes a horizontal approach in discovering the original flavor with a brilliant ceramic cradle. The ATOPACK cartridge is refillable with a huge 8.8ml e-liquid capacity, which will definitely offer you enjoyment.This item also has many color to choose.
Devil RDA Rebuildable Dripping Atomizer Clone with BF Pin SS Version
Devil RDA Rebuildable Dripping Atomizer Clone with BF Pin SS Version $8.99
The Devil RDA is constructed from stainless steel in 24mm diameter. The top of the cap is a bit recessed to fit the drip tip. It features two posts, two terminals per post and juice well about 3.5mm. The bottom airflow blows directly to the coils through two air channels. The RDA comes with 510 protruding copper pin and 810 wide bore drip tip. The logos are shown as on the image. The RDA comes with bottom feeder pin.This item also has many color to choose.
The Devil RDA is constructed from stainless steel in 24mm diameter. The top of the cap is a bit recessed to fit the drip tip. It features two posts, two terminals per post and juice well about 3.5mm. The bottom airflow blows directly to the coils through two air channels. The RDA comes with 510 protruding copper pin and 810 wide bore drip tip. The logos are shown as on the image. The RDA comes with bottom feeder pin.This item also has many color to choose.
Devil RDA Rebuildable Dripping Atomizer Clone with BF Pin Aluminum + SS Version
Devil RDA Rebuildable Dripping Atomizer Clone with BF Pin Aluminum + SS Version $9.99
The Devil RDA is constructed from aluminum (cap) and stainless steel (base) in 24mm diameter. The top of the cap is a bit recessed to fit the drip tip. It features two posts, two terminals per post and juice well about 3.5mm. The bottom airflow blows directly to the coils through two air channels. The RDA comes with 510 protruding copper pin and 810 wide bore drip tip. The logos are shown as on the image. The RDA comes with bottom feeder pin.This item also has many color to choose.
The Devil RDA is constructed from aluminum (cap) and stainless steel (base) in 24mm diameter. The top of the cap is a bit recessed to fit the drip tip. It features two posts, two terminals per post and juice well about 3.5mm. The bottom airflow blows directly to the coils through two air channels. The RDA comes with 510 protruding copper pin and 810 wide bore drip tip. The logos are shown as on the image. The RDA comes with bottom feeder pin.This item also has many color to choose.
Original IJOY Combo RDTA II Rebuildable Dripping Tank Atomizer
Original IJOY Combo RDTA II Rebuildable Dripping Tank Atomizer $42.99
IJOY Combo RDTA II is the next generation of IJOY Combo RDTA with a capacity of 6.5 ml. The evolution of that dramatically increases versatility, range, and capability by allowing users to switch between various decks or utilize the replaceable coil platform. The new unique two post build deck is arranged in a unique Clamp Snag System that features a large knurled thumb screw and a single slot space on each post which allows for toolless adjustment and tightening as well as for extra large coil leads. Implementing the Ultem drip tip, inheriting side filling system and adjustable side airflow, IJOY Combo RDTA II provides huge vapor production and hassle free refilling. Presenting a highly functional system with good-quality machining and manufacturing, IJOY Combo RDTA II is designed to meet the demands of the modern vaping area and all users.This item also has many color to choose.
IJOY Combo RDTA II is the next generation of IJOY Combo RDTA with a capacity of 6.5 ml. The evolution of that dramatically increases versatility, range, and capability by allowing users to switch between various decks or utilize the replaceable coil platform. The new unique two post build deck is arranged in a unique Clamp Snag System that features a large knurled thumb screw and a single slot space on each post which allows for toolless adjustment and tightening as well as for extra large coil leads. Implementing the Ultem drip tip, inheriting side filling system and adjustable side airflow, IJOY Combo RDTA II provides huge vapor production and hassle free refilling. Presenting a highly functional system with good-quality machining and manufacturing, IJOY Combo RDTA II is designed to meet the demands of the modern vaping area and all users.This item also has many color to choose.
Original Sigelei Fuchai GLO 230W TC VW Variable Wattage Mod
Original Sigelei Fuchai GLO 230W TC VW Variable Wattage Mod $55.99
Sigelei Fuchai GLO 230W Mod, a brand new TC VW mod from Sigelei. Powered by 2 x 18650 batteries, the mod can set output wattage from 10 watts to 230 watts. The LED color of bottom and fire button can be customized by setting the RGB value and make it unique! Fuchai GLO has multiple working modes, including POWER, SS, Ti, Ni200 and TCR. It supports USB charging and no need for an extra battery charger.This item also has many color to choose.
Sigelei Fuchai GLO 230W Mod, a brand new TC VW mod from Sigelei. Powered by 2 x 18650 batteries, the mod can set output wattage from 10 watts to 230 watts. The LED color of bottom and fire button can be customized by setting the RGB value and make it unique! Fuchai GLO has multiple working modes, including POWER, SS, Ti, Ni200 and TCR. It supports USB charging and no need for an extra battery charger.This item also has many color to choose.
Wednesday, July 26, 2017
CKF S Anti-anxiety Hand Spinner Fidget Toy EDC Clone
CKF S Anti-anxiety Hand Spinner Fidget Toy EDC Clone $13.99
The CKF S Hand Spinner Clone was made from aluminum with anodic oxidation and comes with frosted finish. It is a small spinning device designed to keep your hands busy and your mind focused. It is pocket sized and can be spun in one hand by using the other hand to rapidly spin it from small continuous strikes. Great for people with Fidgety hands, ADHD, Anxiety & OCD sufferers.This item also has many color to choose.
The CKF S Hand Spinner Clone was made from aluminum with anodic oxidation and comes with frosted finish. It is a small spinning device designed to keep your hands busy and your mind focused. It is pocket sized and can be spun in one hand by using the other hand to rapidly spin it from small continuous strikes. Great for people with Fidgety hands, ADHD, Anxiety & OCD sufferers.This item also has many color to choose.
Metal Worn Reactor Hand Spinner Fidget Toy EDC Clone
Metal Worn Reactor Hand Spinner Fidget Toy EDC Clone $9.99
Metal Worn Reactor Hand Spinner Clone was made from aluminum with anodic oxidation and comes with frosted finish. It will bring you brand new enjoyment. It is a perfect fidget toy to keep your hands busy or to just play with. It is convenient to put it in your pocket, and you can take it out and have fun anytime. It is not only fun and interesting, but also effective for focus, stress relief and deep thought.This item also has many color to choose.
Metal Worn Reactor Hand Spinner Clone was made from aluminum with anodic oxidation and comes with frosted finish. It will bring you brand new enjoyment. It is a perfect fidget toy to keep your hands busy or to just play with. It is convenient to put it in your pocket, and you can take it out and have fun anytime. It is not only fun and interesting, but also effective for focus, stress relief and deep thought.This item also has many color to choose.
Original Youme Angorabbit Fluffy Wicking Cotton for Coil Building
Original Youme Angorabbit Fluffy Wicking Cotton for Coil Building $4.59
The Original Youme Angorabbit Cotton is fluffy dense tasteless cotton which has been specially treated and purified to remove all impurities. It is good to wick the coils and will bring you great vaping experience.
The Original Youme Angorabbit Cotton is fluffy dense tasteless cotton which has been specially treated and purified to remove all impurities. It is good to wick the coils and will bring you great vaping experience.
Replacement Tank Sleeve Tube for Wotofo The Troll RTA
Replacement Tank Sleeve Tube for Wotofo The Troll RTA $3.99
The Replacement Tank Sleeve is made from Epoxy resin with 24mm in outer diameter and 28mm in height. It is suitable for Wotofo The Troll RTA. Please note: as the material is epoxy resin, there may be a little color difference. This item also has many color to choose.
The Replacement Tank Sleeve is made from Epoxy resin with 24mm in outer diameter and 28mm in height. It is suitable for Wotofo The Troll RTA. Please note: as the material is epoxy resin, there may be a little color difference. This item also has many color to choose.
Original Sigelei Snowwolf Vfeng 230W VW Variable Wattage Box Mod + Vfeng Tank Kit
Original Sigelei Snowwolf Vfeng 230W VW Variable Wattage Box Mod + Vfeng Tank Kit $119.90
Mod: The Original Sigelei Snowwolf Vfeng 230W VW Variable Wattage Box Mod is constructed from zinc alloy and stainless steel, coming with mechanical shape. Powered by 2 x High drain 18650 batteries, Snowwolf Vfeng can reach maximum output up to 230W. It has a 1.3 inch TFT color screen, while on the back side there is changeable LED Snowwolf logo.This item also has many color to choose. Tank: The Vfeng Tank is a 24mm diameter tank with 3ml e-juice capacity, and features top refill and bottom airflow control design. The tank is compatible with 0.2 ohm, 0.15 ohm and 0.4 ohm coil heads.
Mod: The Original Sigelei Snowwolf Vfeng 230W VW Variable Wattage Box Mod is constructed from zinc alloy and stainless steel, coming with mechanical shape. Powered by 2 x High drain 18650 batteries, Snowwolf Vfeng can reach maximum output up to 230W. It has a 1.3 inch TFT color screen, while on the back side there is changeable LED Snowwolf logo.This item also has many color to choose. Tank: The Vfeng Tank is a 24mm diameter tank with 3ml e-juice capacity, and features top refill and bottom airflow control design. The tank is compatible with 0.2 ohm, 0.15 ohm and 0.4 ohm coil heads.
Doge V4 RDA Rebuildable Dripping Atomizer Clone
Doge V4 RDA Rebuildable Dripping Atomizer Clone $8.99
The Doge V4 RDA Clone is made from stainless steel in 24mm diameter. The top of sleeve is beveled to fit the drip tip. The side airflow slots bring direct airflow to the coil. The deck features triple posts for single or dual coil building. The funny doge logo is on the side of sleeve. The RDA comes with removable wide bore drip tip.This item also has many color to choose.
The Doge V4 RDA Clone is made from stainless steel in 24mm diameter. The top of sleeve is beveled to fit the drip tip. The side airflow slots bring direct airflow to the coil. The deck features triple posts for single or dual coil building. The funny doge logo is on the side of sleeve. The RDA comes with removable wide bore drip tip.This item also has many color to choose.
El Thunder Hybrid Mechanical Mod Clone
El Thunder Hybrid Mechanical Mod Clone $18.99
The El Thunder Mechanical Mod Clone is constructed from brass in 26mm diameter. There is a bevel in the middle of the body, giving it a very comfortable feel. It features 510 hybrid connection with beveled edge, on top of which the atomizer will look great. The mod has spring bottom fire button. It is powered by 1 x 18650 battery (not included).This item also has many color to choose.
The El Thunder Mechanical Mod Clone is constructed from brass in 26mm diameter. There is a bevel in the middle of the body, giving it a very comfortable feel. It features 510 hybrid connection with beveled edge, on top of which the atomizer will look great. The mod has spring bottom fire button. It is powered by 1 x 18650 battery (not included).This item also has many color to choose.
Rogue Hybrid Mechanical Mod Clone
Rogue Hybrid Mechanical Mod Clone $32.99
The Rogue Mechanical Mod Clone is constructed from cupronickel in 24mm diameter. It is powered by 1 x 18650 battery (not included). It features 510 hybrid top cap and spring fire button.This item also has many color to choose.
The Rogue Mechanical Mod Clone is constructed from cupronickel in 24mm diameter. It is powered by 1 x 18650 battery (not included). It features 510 hybrid top cap and spring fire button.This item also has many color to choose.
Original Sigelei Snowwolf Vfeng 230W VW Variable Wattage Box Mod
Original Sigelei Snowwolf Vfeng 230W VW Variable Wattage Box Mod $79.90
The Original Sigelei Snowwolf Vfeng 230W VW Variable Wattage Box Mod is constructed from zinc alloy and stainless steel, coming with mechanical shape. Powered by 2 x High drain 18650 batteries, Snowwolf Vfeng can reach maximum output up to 230W. It has a 1.3 inch TFT color screen, while on the back side there is changeable LED Snowwolf logo.This item also has many color to choose.
The Original Sigelei Snowwolf Vfeng 230W VW Variable Wattage Box Mod is constructed from zinc alloy and stainless steel, coming with mechanical shape. Powered by 2 x High drain 18650 batteries, Snowwolf Vfeng can reach maximum output up to 230W. It has a 1.3 inch TFT color screen, while on the back side there is changeable LED Snowwolf logo.This item also has many color to choose.
Tuesday, July 25, 2017
Replacement Contact Plate + 510 Connector Ring for Icarus BF Box Mod Clone
Replacement Contact Plate + 510 Connector Ring for Icarus BF Box Mod Clone $1.99
The replacement contact plate and 510 connector ring is made from stainless steel and the ring is silver plated. They are suitable for Icarus style BF box mod. The silver ring is used to improve the connector of the fire button. It is added to the 510 connector, this will increase the contact area to decrease spark as firing. These replacement parts are suitable for all Icarus mod Clone on 3FVape.
The replacement contact plate and 510 connector ring is made from stainless steel and the ring is silver plated. They are suitable for Icarus style BF box mod. The silver ring is used to improve the connector of the fire button. It is added to the 510 connector, this will increase the contact area to decrease spark as firing. These replacement parts are suitable for all Icarus mod Clone on 3FVape.
Original ThunderHead Creations Mundo Compact DIY Tool Kit for Coil Building
Original ThunderHead Creations Mundo Compact DIY Tool Kit for Coil Building $29.99
The Original ThunderHead Creations Mundo Tool Kit has all the tools you may need for rebuilding in one case including a pair of ceramic and stainless steel made tip tweezer, a pair of diagonal pliers, a pair of nipper pliers, a pair of folding scissors, one coil jig, one screwdriver pen, two packs of coils and one pack of cotton. This tool kit will make coil building much easier.
The Original ThunderHead Creations Mundo Tool Kit has all the tools you may need for rebuilding in one case including a pair of ceramic and stainless steel made tip tweezer, a pair of diagonal pliers, a pair of nipper pliers, a pair of folding scissors, one coil jig, one screwdriver pen, two packs of coils and one pack of cotton. This tool kit will make coil building much easier.
Original YouDe UD Zephyrus V3 Octuple Coil Head
Original YouDe UD Zephyrus V3 Octuple Coil Head $10.99
Original YouDe UD Zephyrus V3 Octuple Coil Head features 0.15 ohm resistance, supporting output wattage at 60~120W, best flavor for 80~110W. It is suitable for Zephyrus V3 Tank. This product comes with 2 PCS in 1 pack.
Original YouDe UD Zephyrus V3 Octuple Coil Head features 0.15 ohm resistance, supporting output wattage at 60~120W, best flavor for 80~110W. It is suitable for Zephyrus V3 Tank. This product comes with 2 PCS in 1 pack.
YFTK Le Concorde RDA Rebuildable Dripping Atomizer Clone with BF Pin
YFTK Le Concorde RDA Rebuildable Dripping Atomizer Clone with BF Pin $17.99
YFTK Le Concorde Style BF RDA is constructed from 316 stainless steel in 22mm diameter. The RDA comes with both BF pin and closed dripper pin. The Le Concorde Style BF RDA supports either a horizontal single coil or a double micro coil.
YFTK Le Concorde Style BF RDA is constructed from 316 stainless steel in 22mm diameter. The RDA comes with both BF pin and closed dripper pin. The Le Concorde Style BF RDA supports either a horizontal single coil or a double micro coil.
SXK SOLO RDA Rebuildable Dripping Atomizer Clone with BF Pin
SXK SOLO RDA Rebuildable Dripping Atomizer Clone with BF Pin $11.99 after add to cart
The SXK SOLO RDA Rebuildable Dripping Atomizer Clone is constructed from 316 stainless steel and PEEK. The RDA is in 22mm diameter and comes with bottom feeder Pin for squonk mod.
The SXK SOLO RDA Rebuildable Dripping Atomizer Clone is constructed from 316 stainless steel and PEEK. The RDA is in 22mm diameter and comes with bottom feeder Pin for squonk mod.
VGOD Pro Drip RDA Rebuildable Dripping Atomizer Clone
VGOD Pro Drip RDA Rebuildable Dripping Atomizer Clone $6.99
The VGOD Pro RDA Clone features 24mm diameter with a dual vertical post design with 2 holes per post for an easy and well-designed post set-up. The VGOD Pro Drip style RDA features a durable copper construction as well as unmatched precision when designing the RDA to ensure a flush and un-compromised fit. Featuring dual bottom airflow with direct coil flow ensures a flavorful and vaporful experience every time. A low profile e-juice well is implemented to ensure no over-dripping will leave your RDA.
The VGOD Pro RDA Clone features 24mm diameter with a dual vertical post design with 2 holes per post for an easy and well-designed post set-up. The VGOD Pro Drip style RDA features a durable copper construction as well as unmatched precision when designing the RDA to ensure a flush and un-compromised fit. Featuring dual bottom airflow with direct coil flow ensures a flavorful and vaporful experience every time. A low profile e-juice well is implemented to ensure no over-dripping will leave your RDA.
Reload V1.5 RDA Rebuildable Dripping Atomizer Clone
Reload V1.5 RDA Rebuildable Dripping Atomizer Clone $8.59
The Reload V1.5 RDA Clone is constructed from stainless steel in 24mm diameter. It features two posts large build deck for both single and dual coil building, coming with direct bottom airflow to the coils. The protruding 510 pin makes it compatible with hybrid mod. The RDA comes with 810 wide bore drip tip.This item also has many color to choose.
The Reload V1.5 RDA Clone is constructed from stainless steel in 24mm diameter. It features two posts large build deck for both single and dual coil building, coming with direct bottom airflow to the coils. The protruding 510 pin makes it compatible with hybrid mod. The RDA comes with 810 wide bore drip tip.This item also has many color to choose.
HELM RDA Rebuildable Dripping Atomizer with BF Pin
HELM RDA Rebuildable Dripping Atomizer with BF Pin $7.99
The HELM RDA Clone is constructed from stainless steel in 24mm diameter. It features two-post deck for both single and dual coils building. It comes with top and side airflow control.The base is integrated with PEI material to prevent over-heating. The RDA comes with PEI wide bore drip tip. This RDA comes with bottom feeder pin.This item also has many color to choose.
The HELM RDA Clone is constructed from stainless steel in 24mm diameter. It features two-post deck for both single and dual coils building. It comes with top and side airflow control.The base is integrated with PEI material to prevent over-heating. The RDA comes with PEI wide bore drip tip. This RDA comes with bottom feeder pin.This item also has many color to choose.
Kindbright Soul S RDA Rebuildable Dripping Atomizer Clone with BF Pin
Kindbright Soul S RDA Rebuildable Dripping Atomizer Clone with BF Pin $10.99
The Kindbright Soul S RDA Clone is constructed from 316 medical stainless steel in 22mm diameter. It feature two-post design for single coil building, and dual air slots for adjustable airflow control. This RDA comes with bottom feeder pin.
The Kindbright Soul S RDA Clone is constructed from 316 medical stainless steel in 22mm diameter. It feature two-post design for single coil building, and dual air slots for adjustable airflow control. This RDA comes with bottom feeder pin.
Kindbright Soul S RDA Rebuildable Dripping Atomizer Clone with BF Pin
Kindbright Soul S RDA Rebuildable Dripping Atomizer Clone with BF Pin $10.99
The Kindbright Soul S RDA Clone is constructed from 316 medical stainless steel in 22mm diameter. It feature two-post design for single coil building, and dual air slots for adjustable airflow control. This RDA comes with bottom feeder pin.
The Kindbright Soul S RDA Clone is constructed from 316 medical stainless steel in 22mm diameter. It feature two-post design for single coil building, and dual air slots for adjustable airflow control. This RDA comes with bottom feeder pin.
LieFeng Soul S RDA Rebuildable Dripping Atomizer Clone with BF Pin
LieFeng Soul S RDA Rebuildable Dripping Atomizer Clone with BF Pin $9.99
The LieFeng Soul S RDA Clone is constructed from 316 stainless steel in 22mm diameter. It feature two-post design for single coil building, and dual air slots for adjustable airflow control. This RDA comes with bottom feeder pin.
The LieFeng Soul S RDA Clone is constructed from 316 stainless steel in 22mm diameter. It feature two-post design for single coil building, and dual air slots for adjustable airflow control. This RDA comes with bottom feeder pin.
SXK Gourd RDA Rebuildable Dripping Atomizer Clone
SXK Gourd RDA Rebuildable Dripping Atomizer Clone Original price $9.99,Now only $4.99
The SXK Gourd RDA Clone is constructed from stainless steel in 22mm diameter. It features triple-post deck with top screws, and it is very easy to build coil on it. The side air holes on the sleeve brings direct airflow to the coil. With a long small bore drip tip, you can taste denser flavor.
The SXK Gourd RDA Clone is constructed from stainless steel in 22mm diameter. It features triple-post deck with top screws, and it is very easy to build coil on it. The side air holes on the sleeve brings direct airflow to the coil. With a long small bore drip tip, you can taste denser flavor.
Original YouDe UD Zephyrus V3 Sub Ohm Tank Atomizer
Original YouDe UD Zephyrus V3 Sub Ohm Tank Atomizer $21.99
The Original YouDe UD Zephyrus V3 features 5ml large juice capacity and top filling. It is compatible with Zephyrus V3 0.15ohm Octuple Coil head. It is much easier to build coils on the Velocity style RBA deck. The tank comes with bottom adjustable airflow.This item also has many color to choose.
The Original YouDe UD Zephyrus V3 features 5ml large juice capacity and top filling. It is compatible with Zephyrus V3 0.15ohm Octuple Coil head. It is much easier to build coils on the Velocity style RBA deck. The tank comes with bottom adjustable airflow.This item also has many color to choose.
Original Vandy Vape Pulse 24 BF RDA Rebuildable Dripping Atomizer w/ BF Pin
Original Vandy Vape Pulse 24 BF RDA Rebuildable Dripping Atomizer w/ BF Pin $34.99
The Original Vandy Vape Pulse 24 BF RDA features both standard 510 pin and squonk pin, as well as unique leak-resistant tubular side direct airflow. It comes with a postless deck with four locking holes on the side of base. The e-juice can be filled directly to side juice wells through bottom feeder pin. The low profile design allows for easy coil building. This RDA comes with bottom feeder pin.This item also has many color to choose.
The Original Vandy Vape Pulse 24 BF RDA features both standard 510 pin and squonk pin, as well as unique leak-resistant tubular side direct airflow. It comes with a postless deck with four locking holes on the side of base. The e-juice can be filled directly to side juice wells through bottom feeder pin. The low profile design allows for easy coil building. This RDA comes with bottom feeder pin.This item also has many color to choose.
Original VOOPOO Demon RDA Rebuildable Dripping Atomizer
Original VOOPOO Demon RDA Rebuildable Dripping Atomizer $18.59
The Original VOOPOO Demon RDA comes with world first column superimposed design electrode, increasing the power performance by 20% or more, and single or double coils are easy to be replaced and assembled. Multiple airflow control with four adjustable side holes make the RDA more effective and comfortable to use. It supports both top and bottom filling. Double heat insulation design on both top and bottom avoids the atomizer from scalding and protects your mouth from burning. The top cap / sleeve is made from eco-friendly aluminum and the base is made from gold plated brass material. Demon RDA comes with a PEI drip tip.This item also has many color to choose.
The Original VOOPOO Demon RDA comes with world first column superimposed design electrode, increasing the power performance by 20% or more, and single or double coils are easy to be replaced and assembled. Multiple airflow control with four adjustable side holes make the RDA more effective and comfortable to use. It supports both top and bottom filling. Double heat insulation design on both top and bottom avoids the atomizer from scalding and protects your mouth from burning. The top cap / sleeve is made from eco-friendly aluminum and the base is made from gold plated brass material. Demon RDA comes with a PEI drip tip.This item also has many color to choose.
Monday, July 24, 2017
SXK Replacement Sleeve for Soul S RDA Clone
SXK Replacement Sleeve for Soul S RDA Clone $4.00
The SXK Replacement Sleeve is made from PEI, with 22mm in diameter and 18mm in height. It is suitable for SXK Soul S RDA Clone.
The SXK Replacement Sleeve is made from PEI, with 22mm in diameter and 18mm in height. It is suitable for SXK Soul S RDA Clone.
Original Asvape Clapton Pre-built Coil Heating Wire + Cotton Kit
Original Asvape Clapton Pre-built Coil Heating Wire + Cotton Kit $8.99
The Original Asvape Cotton is 100% natural organic cotton, which is highly absorbent and tasteless. The Authentic Asvape Clapton Pre-built Coil Heating Wire is made from Nichrome 80 wires and features 0.3 ohm. This heating wire will be a good vaping choice for DIY. This product comes with 1 pack of cotton and 1 coil pack (with 2 PCS coils in it).
The Original Asvape Cotton is 100% natural organic cotton, which is highly absorbent and tasteless. The Authentic Asvape Clapton Pre-built Coil Heating Wire is made from Nichrome 80 wires and features 0.3 ohm. This heating wire will be a good vaping choice for DIY. This product comes with 1 pack of cotton and 1 coil pack (with 2 PCS coils in it).
Original Asvape Ni80 Clapton Pre-built Coil Heating Wire
Original Asvape Ni80 Clapton Pre-built Coil Heating Wire $9.99
The Original Asvape Clapton Pre-built Coil Heating Wire is made from Nichrome 80 wires and features 0.3 ohm. This heating wire will be a good vaping choice for DIY. This product comes with 5 packs in 1 box, each pack has 2 piece of coils, totally 10 piece of coils.
The Original Asvape Clapton Pre-built Coil Heating Wire is made from Nichrome 80 wires and features 0.3 ohm. This heating wire will be a good vaping choice for DIY. This product comes with 5 packs in 1 box, each pack has 2 piece of coils, totally 10 piece of coils.
Original BeFire 3.7V 40A 3000mAh 18650 High Drain Rechargeable Battery
Original BeFire 3.7V 40A 3000mAh 18650 High Drain Rechargeable Battery $9.99
The Original BeFire 18650 Battery, featuring a diameter of 18mm and a length of 65mm, has a 3000mAh large battery capacity with 40A max continuous discharging current. Long storage life and high energy density. This product comes with two (2) pieces in one pack.
The Original BeFire 18650 Battery, featuring a diameter of 18mm and a length of 65mm, has a 3000mAh large battery capacity with 40A max continuous discharging current. Long storage life and high energy density. This product comes with two (2) pieces in one pack.
The Stealth Hybrid Mechanical Mod Clone + Battle RDA Clone Kit
The Stealth Hybrid Mechanical Mod Clone + Battle RDA Clone Kit $23.99
Mod:The Stealth Mechanical Mod Clone is made from brass and powered by 1 x 18650 battery (not included). The fixed 510 hybrid top is machined into the mod for enhanced conductivity. There are 4 vent holes on the top of the mod.This item also has another color to choose. RDA: The Complyfe Battle RDA Clone is constructed from stainless steel dual-post deck, brass top cap and stainless steel drip tip. It features two posts design and adjustable airflow.
Mod:The Stealth Mechanical Mod Clone is made from brass and powered by 1 x 18650 battery (not included). The fixed 510 hybrid top is machined into the mod for enhanced conductivity. There are 4 vent holes on the top of the mod.This item also has another color to choose. RDA: The Complyfe Battle RDA Clone is constructed from stainless steel dual-post deck, brass top cap and stainless steel drip tip. It features two posts design and adjustable airflow.
Complyfe Vortex Mechanical Mod Clone + Battle RDA Clone Kit
Complyfe Vortex Mechanical Mod Clone + Battle RDA Clone Kit $23.99
Mod:The Complyfe Vortex Style Mechanical Mod is constructed from brass powered by 1 x 18650 battery. Comes with the unique vortex shape, this mod will bring an amazing vaping experience to your vaping life!This item also has another color to choose. RDA: The Complyfe Battle style RDA is constructed from stainless steel dual-post deck, brass top cap and stainless steel drip tip. It features two posts design and adjustable airflow.
Mod:The Complyfe Vortex Style Mechanical Mod is constructed from brass powered by 1 x 18650 battery. Comes with the unique vortex shape, this mod will bring an amazing vaping experience to your vaping life!This item also has another color to choose. RDA: The Complyfe Battle style RDA is constructed from stainless steel dual-post deck, brass top cap and stainless steel drip tip. It features two posts design and adjustable airflow.
AV Lyfe Dimple Hybrid Mechanical Mod Clone + Battle RDA Clone Kit
AV Lyfe Dimple Hybrid Mechanical Mod Clone + Battle RDA Clone Kit $23.99
Mod: The AV Lyfe Dimple Hybrid Mechanical Mod Clone is constructed from brass. The Dimple style mechanical mod is powered by 1 x 18650 battery (not included). Comes with the unique twisted shape, this Fast Twist style mod will bring an amazing vaping experience to your vaping life!This item also has another color to choose. RDA: The Complyfe Battle RDA Clone is constructed from stainless steel dual-post deck, brass top cap and stainless steel drip tip. It features two posts design and adjustable airflow.
Mod: The AV Lyfe Dimple Hybrid Mechanical Mod Clone is constructed from brass. The Dimple style mechanical mod is powered by 1 x 18650 battery (not included). Comes with the unique twisted shape, this Fast Twist style mod will bring an amazing vaping experience to your vaping life!This item also has another color to choose. RDA: The Complyfe Battle RDA Clone is constructed from stainless steel dual-post deck, brass top cap and stainless steel drip tip. It features two posts design and adjustable airflow.
The Double Cross Hybrid Mechanical Mod Clone + Battle RDA Clone Kit
The Double Cross Hybrid Mechanical Mod Clone + Battle RDA Clone Kit $23.99
Mod: The Double Cross Mechanical Mod Clone is made from brass and powered by 1 x 18650 battery. The fixed 510 hybrid top is machined into the mod for enhanced conductivity. There are 4 vent holes on the top of the mod.This item also has another color to choose. RDA: The Complyfe Battle RDA Clone is constructed from stainless steel triple-post deck, brass top cap and stainless steel drip tip. It features triple posts design and adjustable airflow.
Mod: The Double Cross Mechanical Mod Clone is made from brass and powered by 1 x 18650 battery. The fixed 510 hybrid top is machined into the mod for enhanced conductivity. There are 4 vent holes on the top of the mod.This item also has another color to choose. RDA: The Complyfe Battle RDA Clone is constructed from stainless steel triple-post deck, brass top cap and stainless steel drip tip. It features triple posts design and adjustable airflow.
The Swiss Hybrid Mechanical Mod Clone + Battle RDA Kit Clone
The Swiss Hybrid Mechanical Mod Clone + Battle RDA Kit Clone $23.99
Mod: The Swiss Mechanical Mod Clone is made from brass and powered by 1 x 18650 battery. The fixed 510 hybrid top is machined into the mod for enhanced conductivity. There are 4 vent holes on the top of the mod.This item also has another color to choose. RDA: The Complyfe Battle RDA Clone is constructed from stainless steel triple-post deck, brass top cap and stainless steel drip tip. It features triple posts design and adjustable airflow.
Mod: The Swiss Mechanical Mod Clone is made from brass and powered by 1 x 18650 battery. The fixed 510 hybrid top is machined into the mod for enhanced conductivity. There are 4 vent holes on the top of the mod.This item also has another color to choose. RDA: The Complyfe Battle RDA Clone is constructed from stainless steel triple-post deck, brass top cap and stainless steel drip tip. It features triple posts design and adjustable airflow.
The Predator Hybrid Mechanical Mod Clone + AV RDA Clone Kit
The Predator Hybrid Mechanical Mod Clone + AV RDA Clone Kit $23.99
Mod: The Predator Mechanical Mod Clone is made from brass and powered by 1 x 18650 battery (not included). The fixed 510 hybrid top is machined into the mod for enhanced conductivity. There are 4 vent holes on the top of the mod.This item also has another color to choose. RDA: The AV RDA Clone is made from brass in 24mm diameter. It features integrated sleeve with drip tip and bottom adjustable airflow. The build deck features two posts for single coil.
Mod: The Predator Mechanical Mod Clone is made from brass and powered by 1 x 18650 battery (not included). The fixed 510 hybrid top is machined into the mod for enhanced conductivity. There are 4 vent holes on the top of the mod.This item also has another color to choose. RDA: The AV RDA Clone is made from brass in 24mm diameter. It features integrated sleeve with drip tip and bottom adjustable airflow. The build deck features two posts for single coil.
SXK Skyline RTA Rebuildable Tank Atomizer Clone
SXK Skyline RTA Rebuildable Tank Atomizer Clone $19.90
The SXK Skyline RTA Clone is constructed from 316 stainless steel in 22mm diameter with 4ml capacity. It comes with "AirDisks" in order to satisfy the air supply for every taste for M2L as well as directly to the lungs in full. This allows the single-coil-atomizer to produce any desired vape experience depending on the daytime and mood. In the Skyline style RTA you can also find the refill opening under the unscrewable top cap. A special feature is immediately apparent. The drip tip has a hexagonal connection at the bottom, which fits into the corresponding counterpart of the chimney. This controls the liquid flow.
The SXK Skyline RTA Clone is constructed from 316 stainless steel in 22mm diameter with 4ml capacity. It comes with "AirDisks" in order to satisfy the air supply for every taste for M2L as well as directly to the lungs in full. This allows the single-coil-atomizer to produce any desired vape experience depending on the daytime and mood. In the Skyline style RTA you can also find the refill opening under the unscrewable top cap. A special feature is immediately apparent. The drip tip has a hexagonal connection at the bottom, which fits into the corresponding counterpart of the chimney. This controls the liquid flow.
SXK Soul S RDA Rebuildable Dripping Atomizer Clone with BF Pin
SXK Soul S RDA Rebuildable Dripping Atomizer Clone with BF Pin $9.99 after add to cart
The SXK Soul S RDA Clone is constructed from 316 stainless steel in 22mm diameter. It feature two-post design for single coil building, and dual middle air slots for adjustable airflow control. This RDA comes with bottom feeder pin.
The SXK Soul S RDA Clone is constructed from 316 stainless steel in 22mm diameter. It feature two-post design for single coil building, and dual middle air slots for adjustable airflow control. This RDA comes with bottom feeder pin.
Original Hellvape Dead Rabbit RDA Rebuildable Dripping Atomizer w/ BF Pin
Original Hellvape Dead Rabbit RDA Rebuildable Dripping Atomizer w/ BF Pin $34.90
The Original Hellvape Dead Rabbit RDA is a 24mm diameter RDA with ample build space and generous post holes. The slide in top coil deck takes the guesswork out of pre cutting your coil leads. It comes with adjustable top side diagonal airflow to create massive flavor and to minimize leaking. The protruding 510 pin and peek insulation makes it really friendly to mechanical mods. This RDA comes with bottom feeder pin.This item also has many color to choose.
The Original Hellvape Dead Rabbit RDA is a 24mm diameter RDA with ample build space and generous post holes. The slide in top coil deck takes the guesswork out of pre cutting your coil leads. It comes with adjustable top side diagonal airflow to create massive flavor and to minimize leaking. The protruding 510 pin and peek insulation makes it really friendly to mechanical mods. This RDA comes with bottom feeder pin.This item also has many color to choose.
Original Desire Mad Dog GTA Rebuildable Tank Atomizer
Original Desire Mad Dog GTA Rebuildable Tank Atomizer $31.99
After the success of Mad Dog RDA, Mad Dog RDTA, Desire brings another great atomizer to us, the Mad Dog GTA (Genesis Tank Atomizer). It features 24mm diameter and large tank capacity, as well as bottom airflow system with two air slots. Mad Dog GTA comes with a wide bore drip tip.This item also has many color to choose.
After the success of Mad Dog RDA, Mad Dog RDTA, Desire brings another great atomizer to us, the Mad Dog GTA (Genesis Tank Atomizer). It features 24mm diameter and large tank capacity, as well as bottom airflow system with two air slots. Mad Dog GTA comes with a wide bore drip tip.This item also has many color to choose.
Original SMOKTech SMOK G150 150W 4200mAh TC VW Variable Wattage Box Mod
Original SMOKTech SMOK G150 150W 4200mAh TC VW Variable Wattage Box Mod $44.99
The Original SMOKTech SMOK G150 Mod comes with built-in 4200mAh battery and the maximum output wattage can reach to 150W. In VW mode, the resistance range is 0.1~3.0ohm, while in TC mode, it is 0.06~3.0ohm. With a large OLED display, it is quite easy to read all vaping information. G150 has multiple protections, such as short circuit protection, over-heating protection, low-battery warning, intelligent atomizer recognition, puff monitoring system, 12 seconds cut-off.This item also has many color to choose.
The Original SMOKTech SMOK G150 Mod comes with built-in 4200mAh battery and the maximum output wattage can reach to 150W. In VW mode, the resistance range is 0.1~3.0ohm, while in TC mode, it is 0.06~3.0ohm. With a large OLED display, it is quite easy to read all vaping information. G150 has multiple protections, such as short circuit protection, over-heating protection, low-battery warning, intelligent atomizer recognition, puff monitoring system, 12 seconds cut-off.This item also has many color to choose.
The Stealth Hybrid Mechanical Mod Clone
The Stealth Hybrid Mechanical Mod Clone $17.99
The Stealth Mechanical Mod Clone is made from brass and powered by 1 x 18650 battery (not included). The fixed 510 hybrid top is machined into the mod for enhanced conductivity. There are 4 vent holes on the top of the mod.This item also has another color to choose.
The Stealth Mechanical Mod Clone is made from brass and powered by 1 x 18650 battery (not included). The fixed 510 hybrid top is machined into the mod for enhanced conductivity. There are 4 vent holes on the top of the mod.This item also has another color to choose.
Complyfe Vortex Mechanical Mod Clone
Complyfe Vortex Mechanical Mod Clone $17.99
The Complyfe Vortex Mechanical Mod Clone is constructed from brass powered by 1 x 18650 battery. Comes with the unique vortex shape, this mod will bring an amazing vaping experience to your vaping life!This item also has another color to choose.
The Complyfe Vortex Mechanical Mod Clone is constructed from brass powered by 1 x 18650 battery. Comes with the unique vortex shape, this mod will bring an amazing vaping experience to your vaping life!This item also has another color to choose.
AV Lyfe Dimple Hybrid Mechanical Mod Clone
AV Lyfe Dimple Hybrid Mechanical Mod Clone $17.99
The AV Lyfe Dimple Hybrid Mechanical Mod Clone is constructed from brass. The Dimple style mechanical mod is powered by 1 x 18650 battery (not included). Comes with the unique twisted shape, this Fast Twist style mod will bring an amazing vaping experience to your vaping life!This item also has another color to choose.
The AV Lyfe Dimple Hybrid Mechanical Mod Clone is constructed from brass. The Dimple style mechanical mod is powered by 1 x 18650 battery (not included). Comes with the unique twisted shape, this Fast Twist style mod will bring an amazing vaping experience to your vaping life!This item also has another color to choose.
The Double Cross Hybrid Mechanical Mod Clone
The Double Cross Hybrid Mechanical Mod Clone $17.99
The Double Cross Mechanical Mod Clone is made from brass and powered by 1 x 18650 battery. The fixed 510 hybrid top is machined into the mod for enhanced conductivity. There are 4 vent holes on the top of the Double Cross mod.This item also has another color to choose.
The Double Cross Mechanical Mod Clone is made from brass and powered by 1 x 18650 battery. The fixed 510 hybrid top is machined into the mod for enhanced conductivity. There are 4 vent holes on the top of the Double Cross mod.This item also has another color to choose.
The Swiss Hybrid Mechanical Mod Clone
The Swiss Hybrid Mechanical Mod Clone $17.99
The Swiss Mechanical Mod Clone is made from brass and powered by 1 x 18650 battery. The fixed 510 hybrid top is machined into the mod for enhanced conductivity. There are 4 vent holes on the top of the Double Cross mod.This item also has another color to choose.
The Swiss Mechanical Mod Clone is made from brass and powered by 1 x 18650 battery. The fixed 510 hybrid top is machined into the mod for enhanced conductivity. There are 4 vent holes on the top of the Double Cross mod.This item also has another color to choose.
The Predator Hybrid Mechanical Mod Clone
The Predator Hybrid Mechanical Mod Clone $17.99
The Predator Mechanical Mod Clone is made from brass and powered by 1 x 18650 battery (not included). The fixed 510 hybrid top is machined into the mod for enhanced conductivity. There are 4 vent holes on the top of the mod.This item also has another color to choose.
The Predator Mechanical Mod Clone is made from brass and powered by 1 x 18650 battery (not included). The fixed 510 hybrid top is machined into the mod for enhanced conductivity. There are 4 vent holes on the top of the mod.This item also has another color to choose.
Original Smoant Battlestar MU 200W TC VW Variable Wattage Box Mod
Original Smoant Battlestar MU 200W TC VW Variable Wattage Box Mod $129.99
The Original Smoant Battlestar MU 200W TC VW Box Mod is a full stable wood chassis version of the standard Battlestar. The Smoant features a curved and ergonomic design intended to fit comfortably within the user's hand during use. With dual 18650 batteries, the output range can vary from 1 to 200W, with support for atomizers down to 0.1 ohms. The temperature control mode supports Ni200 Nickel, Titanium, and 304 / 316 / 317 Stainless Steels.This item also has many color to choose.
The Original Smoant Battlestar MU 200W TC VW Box Mod is a full stable wood chassis version of the standard Battlestar. The Smoant features a curved and ergonomic design intended to fit comfortably within the user's hand during use. With dual 18650 batteries, the output range can vary from 1 to 200W, with support for atomizers down to 0.1 ohms. The temperature control mode supports Ni200 Nickel, Titanium, and 304 / 316 / 317 Stainless Steels.This item also has many color to choose.
Sunday, July 23, 2017
YFTK SOLO RDA Rebuildable Dripping Atomizer with BF Pin
YFTK SOLO RDA Rebuildable Dripping Atomizer with BF Pin $18.99
The YFTK SOLO RDA Rebuildable Dripping Atomizer is constructed from 316 stainless steel and PEEK. The RDA is in 22mm diameter and comes with bottom feeder Pin for squonk mod.
The YFTK SOLO RDA Rebuildable Dripping Atomizer is constructed from 316 stainless steel and PEEK. The RDA is in 22mm diameter and comes with bottom feeder Pin for squonk mod.
YFTK Replacement Tank Sleeve + Drip Tip for SOLO RDA
YFTK Replacement Tank Sleeve + Drip Tip for SOLO RDA $9.99
The YFTK Replacement top cap and Drip Tip is made from PEEK and suitable for SOLO RDA.
The YFTK Replacement top cap and Drip Tip is made from PEEK and suitable for SOLO RDA.
YFTK Replacement Tank Sleeve + Drip Tip for SOLO RDA
YFTK Replacement Tank Sleeve + Drip Tip for SOLO RDA $6.49
The YFTK Replacement top cap and Drip Tip is made from PEI and suitable for SOLO RDA.
The YFTK Replacement top cap and Drip Tip is made from PEI and suitable for SOLO RDA.
Replacement Squonk Bottle for Hidra BF Mechanical Box Mod Clone
Replacement Squonk Bottle for Hidra BF Mechanical Box Mod Clone $1.39
The Replacement Dropper Bottle is designed for Hidra BF Mechanical Box Mod Clone. It is made from PC material and can hold 8ml e-juice.
The Replacement Dropper Bottle is designed for Hidra BF Mechanical Box Mod Clone. It is made from PC material and can hold 8ml e-juice.
810 Wide Bore Drip Tip for 528 Goon / Goon LP / Kennedy 24 / 25 / Battle RDA
810 Wide Bore Drip Tip for 528 Goon / Goon LP / Kennedy 24 / 25 / Battle RDA $3.99
The 810 Drip Tip is made from Titanium in 12mm height. It is suitable for Goon RDA, Goon RTA, Lost Art Goon RDA, Goon LP RDA, Kennedy 24 / 25 RDA, Battle RDA, Kryten RDA, Mad Dog RDA, Mask RDA, CSMNT Cosmonaut RDA, Unholy RDA, Apocalypse GEN 2 RDA, Reload RDA, Mini Battle RDA, Avid Lyfe Captain Cap II, Sith RDA.
The 810 Drip Tip is made from Titanium in 12mm height. It is suitable for Goon RDA, Goon RTA, Lost Art Goon RDA, Goon LP RDA, Kennedy 24 / 25 RDA, Battle RDA, Kryten RDA, Mad Dog RDA, Mask RDA, CSMNT Cosmonaut RDA, Unholy RDA, Apocalypse GEN 2 RDA, Reload RDA, Mini Battle RDA, Avid Lyfe Captain Cap II, Sith RDA.
Chalice IV RDA Rebuildable Dripping Atomizer Clone
Chalice IV RDA Rebuildable Dripping Atomizer Clone $10.59
The Chalice IV RDA Clone is constructed from stainless steel in 18mm diameter. It features a two-post build deck for dual coil build and adjustable airflow control. The RDA comes with a removable 510 drip tip.
The Chalice IV RDA Clone is constructed from stainless steel in 18mm diameter. It features a two-post build deck for dual coil build and adjustable airflow control. The RDA comes with a removable 510 drip tip.
Original Oumier Wasp Nano RDA Rebuildable Dripping Atomizer with BF Pin
Original Oumier Wasp Nano RDA Rebuildable Dripping Atomizer with BF Pin $11.99
The Original Oumier Wasp Nano RDA is constructed from stainless steel (base) and PC (sleeve) in 22mm diameter. The RDA features large build deck and unique coil-locking design for single coil build. It has direct side airflow design to ensure fabulous vaping experience. This RDA comes with bottom feeder pin.
The Original Oumier Wasp Nano RDA is constructed from stainless steel (base) and PC (sleeve) in 22mm diameter. The RDA features large build deck and unique coil-locking design for single coil build. It has direct side airflow design to ensure fabulous vaping experience. This RDA comes with bottom feeder pin.
SXK Taifun GS RTA Rebuildable Tank Atomizer Clone
SXK Taifun GS RTA Rebuildable Tank Atomizer Clone Original Price $9.99,Now Only $7.99
The SXK Taifun GS Style RTA Clone is constructed from stainless steel and PMMA material in 17mm diameter. It features top filling design and can hold about 2.7ml e-juice. The deck features two posts for single coil building. Taifun GS also features bottom adjsutable airflow. It comes with a small bore long drip tip for dense flavor.
The SXK Taifun GS Style RTA Clone is constructed from stainless steel and PMMA material in 17mm diameter. It features top filling design and can hold about 2.7ml e-juice. The deck features two posts for single coil building. Taifun GS also features bottom adjsutable airflow. It comes with a small bore long drip tip for dense flavor.
Icarus 1.5 BF Squonk Mechanical Box Mod Clone with Extra Orange Front + Back Cover Plates
Icarus 1.5 BF Squonk Mechanical Box Mod Clone with Extra Orange Front + Back Cover Plates $30.99
The Icarus 1.5 BF Squonk Mechanical Box Mod Clone is constructed from aluminum with stainless steel connector. The mod has an inner bottle for bottom feeder, with a large capacity of 8ml. The bottle is made from PE. It is powered by 1 x 18650 battery (not included) and very easy to use. The connector of the fire button is improved and a silver ring is added to the 510 connector, this will increase the contact area to decrease spark as firing. Please check the pictures This product comes with one black mechanical mod (with black cover plates), and two extra orange cover plates (1 x front plate, 1 x back plate).
The Icarus 1.5 BF Squonk Mechanical Box Mod Clone is constructed from aluminum with stainless steel connector. The mod has an inner bottle for bottom feeder, with a large capacity of 8ml. The bottle is made from PE. It is powered by 1 x 18650 battery (not included) and very easy to use. The connector of the fire button is improved and a silver ring is added to the 510 connector, this will increase the contact area to decrease spark as firing. Please check the pictures This product comes with one black mechanical mod (with black cover plates), and two extra orange cover plates (1 x front plate, 1 x back plate).
Icarus 1.5 BF Squonk Mechanical Box Mod Clone
Icarus 1.5 BF Squonk Mechanical Box Mod Clone $23.99
The Icarus 1.5 BF Squonk Mechanical Box Mod Clone is constructed from aluminum with stainless steel connector. The mod has an inner bottle for bottom feeder, with a large capacity of 8ml. The bottle is made from PE. It is powered by 1 x 18650 battery (not included) and very easy to use. The connector of the fire button is improved and a silver ring is added to the 510 connector, this will increase the contact area to decrease spark as firing. Please check the pictures.
The Icarus 1.5 BF Squonk Mechanical Box Mod Clone is constructed from aluminum with stainless steel connector. The mod has an inner bottle for bottom feeder, with a large capacity of 8ml. The bottle is made from PE. It is powered by 1 x 18650 battery (not included) and very easy to use. The connector of the fire button is improved and a silver ring is added to the 510 connector, this will increase the contact area to decrease spark as firing. Please check the pictures.
Cutthroat Edition Consvr Hybrid Mechanical Mod Clone
Cutthroat Edition Consvr Hybrid Mechanical Mod Clone $18.99
The Cutthroat Edition Consvr Mechanical Mod Clone is constructed from brass in 25mm diameter. It features 510 hybrid top cap, hourglass groove, rare earth magnet button and unique floating ball contact pin. It is powered by 1 x b18650 battery (not included).This item also has many color to choose.
The Cutthroat Edition Consvr Mechanical Mod Clone is constructed from brass in 25mm diameter. It features 510 hybrid top cap, hourglass groove, rare earth magnet button and unique floating ball contact pin. It is powered by 1 x b18650 battery (not included).This item also has many color to choose.
Original Steel Vape Phoenix Bottom Feeder Squonk Mechanical Box Mod
Original Steel Vape Phoenix Bottom Feeder Squonk Mechanical Box Mod $30.99
The Original Steel Vape Phoenix Box Mod is a bottom feeder squonk mechanical box mod with 6.8ml squonk bottle. It is powered by one single 20700 battery. The box cover can be attached by magnets. The cover has a vent holes on it for observing how much juice remains.
The Original Steel Vape Phoenix Box Mod is a bottom feeder squonk mechanical box mod with 6.8ml squonk bottle. It is powered by one single 20700 battery. The box cover can be attached by magnets. The cover has a vent holes on it for observing how much juice remains.
Original Wotofo RAM Bottom Feeder Squonk Mechanical Box Mod
Original Wotofo RAM Bottom Feeder Squonk Mechanical Box Mod $68.99
The Ram Box Mod by Stentorian and Wotofo is one of the first affordable bottom feeder squonk mods on the market. It features an elegant design and comes with 7ml squonk bottle. The Ram Squonker Box Mod has a fire button with a safety lock on to prevent accidental discharge.This item also has many color to choose.
The Ram Box Mod by Stentorian and Wotofo is one of the first affordable bottom feeder squonk mods on the market. It features an elegant design and comes with 7ml squonk bottle. The Ram Squonker Box Mod has a fire button with a safety lock on to prevent accidental discharge.This item also has many color to choose.
Original IJOY Captain PD1865 225W TC VW Variable Wattage Box Mod
Original IJOY Captain PD1865 225W TC VW Variable Wattage Box Mod $55.99
The Original Captain PD1865 Box Mod is a high quality temperature control and variable wattage mod. Powered by dual 18650 batteries, the output power can reach up to 225 watts. Captain PD1865 comes with comprehensive temperature control mode and effective fine-tuning settings. Compact size with no overhanging with 30mm atomizers, Captain PD1865 will bring you nice flavor and clouds production.This item also has many color to choose.
The Original Captain PD1865 Box Mod is a high quality temperature control and variable wattage mod. Powered by dual 18650 batteries, the output power can reach up to 225 watts. Captain PD1865 comes with comprehensive temperature control mode and effective fine-tuning settings. Compact size with no overhanging with 30mm atomizers, Captain PD1865 will bring you nice flavor and clouds production.This item also has many color to choose.
Original Modefine Prism 250W TC VW Variable Wattage Box Mod
Original Modefine Prism 250W TC VW Variable Wattage Box Mod $45.00
The Original Modefine Prism 250W TC VW Mod is a temperature control and variable wattage mod with stylish pentagonal prism shape. Powered by triple 18650 high drain batteries, the output power of Prism can reach up to 250 watts. The temperature range is 100~315'C / 200~600'F. It also features a large OLED screen and big fire button. The Modefine Prism 250W mod will be a great choice for your vaping.This item also has many color to choose.
The Original Modefine Prism 250W TC VW Mod is a temperature control and variable wattage mod with stylish pentagonal prism shape. Powered by triple 18650 high drain batteries, the output power of Prism can reach up to 250 watts. The temperature range is 100~315'C / 200~600'F. It also features a large OLED screen and big fire button. The Modefine Prism 250W mod will be a great choice for your vaping.This item also has many color to choose.
Thursday, July 20, 2017
YFTK Replacement Sleeve + 510 Drip Tip for Soul S RDA Clone
YFTK Replacement Sleeve + 510 Drip Tip for Soul S RDA Clone $6.99
The YFTK replacement sleeve and 510 drip tip are made from PEI. They are suitable for YFTK Soul S RDA Clone. The 510 drip tip measures 11.5mm in overall diameter and 13mm in height. The sleeve measures 22mm in outer diameter, 20mm in inner diameter and 18mm in height.
The YFTK replacement sleeve and 510 drip tip are made from PEI. They are suitable for YFTK Soul S RDA Clone. The 510 drip tip measures 11.5mm in overall diameter and 13mm in height. The sleeve measures 22mm in outer diameter, 20mm in inner diameter and 18mm in height.
Original Vapethink Sweep V1 Ni80 Pre-built Coil Heating Wire
Original Vapethink Sweep V1 Ni80 Pre-built Coil Heating Wire $4.99
The Original Vapethink Sweep V1 Pre-built Coil Heating Wire is made from Nichrome 80 wires and features 0.2 ohm. This pre-coiled heating wire comes with 26GA x 3 + 38GA coils. This heating wire will be a good vaping choice for DIY. This product comes with 10 PCS in 1 pack.This item also has many rated parameters to choose.
The Original Vapethink Sweep V1 Pre-built Coil Heating Wire is made from Nichrome 80 wires and features 0.2 ohm. This pre-coiled heating wire comes with 26GA x 3 + 38GA coils. This heating wire will be a good vaping choice for DIY. This product comes with 10 PCS in 1 pack.This item also has many rated parameters to choose.
Original Sigelei Laisimo A.L ASHKANDI Mechanical Mod + RDA Kit
Original Sigelei Laisimo A.L ASHKANDI Mechanical Mod + RDA Kit $39.99
Original Sigelei Laisimo A.L ASHKANDI Mechanical Mod Tricker Kit includes a billet-brass-construction mech mod and a 25mm RDA. The A.L ASHKANDI mod features multicolor resin coating and magnetic fire button. The RDA features 24K gold plated deck and adjustable airflow. A.L is a great choice for cloud chaser and those who want to vape tricks.This item also has many color and rated parameters to choose.
Original Sigelei Laisimo A.L ASHKANDI Mechanical Mod Tricker Kit includes a billet-brass-construction mech mod and a 25mm RDA. The A.L ASHKANDI mod features multicolor resin coating and magnetic fire button. The RDA features 24K gold plated deck and adjustable airflow. A.L is a great choice for cloud chaser and those who want to vape tricks.This item also has many color and rated parameters to choose.
Metal Moose Clasick Mechanical Mod Clone + Battle Style RDA Clone Kit
Metal Moose Clasick Mechanical Mod Clone + Battle Style RDA Clone Kit $22.99
Mod: The Metal Moose Clasick Mechanical Mod Clone is constructed from brass in 24mm diameter. It features simple but classic appearance, and is powered by 1 x 18650 battery. Hope this mechanical mod can bring you unique vaping experience.This item also has many color to choose. RDA: The Battle RDA Clone is constructed from brass cap and stainless steel deck. The Battle style RDA comes with triple-post deck design. Features 24mm diameter, large build deck, this Battle style RDA is a good choice for cloud chasing enthusiasts!This item also has many rated parameters to choose.
Mod: The Metal Moose Clasick Mechanical Mod Clone is constructed from brass in 24mm diameter. It features simple but classic appearance, and is powered by 1 x 18650 battery. Hope this mechanical mod can bring you unique vaping experience.This item also has many color to choose. RDA: The Battle RDA Clone is constructed from brass cap and stainless steel deck. The Battle style RDA comes with triple-post deck design. Features 24mm diameter, large build deck, this Battle style RDA is a good choice for cloud chasing enthusiasts!This item also has many rated parameters to choose.
Original Eleaf iKunn i200 200W 4600mAh TC VW Variable Wattage Box Mod + MELO 4 Tank Kit
Original Eleaf iKunn i200 200W 4600mAh TC VW Variable Wattage Box Mod + MELO 4 Tank Kit $42.69
Mod: The Eleaf iKuun i200 features an innovative temperature protection system for charging that highly secures the safety of charging process (Temperature range for charging is -5~50'C or 23~122'F). Powered by an internal battery, this e-cigarette box mod is capable of outputting a max power of 200 watts, allowing a great vaping experience with huge vapor production. It also comes with a big 0.96 inch screen that offers an all-new concise interface and has 2A quick charge capacity.This item also has many color to choose. Tank: The MELO 4 atomizer features an all-new EC2 series coil which is the upgraded version based on original popular EC coils, bringing you ultimate vaping experience with nice flavor. The retractable top fill system makes it really easy to fill the tank. You just need to slide the drip tip back and it reveals the fill port. The dual large air inlets allow optimal airflow for great vapor production.This item also has many rated parameters to choose.
Mod: The Eleaf iKuun i200 features an innovative temperature protection system for charging that highly secures the safety of charging process (Temperature range for charging is -5~50'C or 23~122'F). Powered by an internal battery, this e-cigarette box mod is capable of outputting a max power of 200 watts, allowing a great vaping experience with huge vapor production. It also comes with a big 0.96 inch screen that offers an all-new concise interface and has 2A quick charge capacity.This item also has many color to choose. Tank: The MELO 4 atomizer features an all-new EC2 series coil which is the upgraded version based on original popular EC coils, bringing you ultimate vaping experience with nice flavor. The retractable top fill system makes it really easy to fill the tank. You just need to slide the drip tip back and it reveals the fill port. The dual large air inlets allow optimal airflow for great vapor production.This item also has many rated parameters to choose.
Original Eleaf iKunn i80 80W 3000mAh TC VW Variable Wattage Box Mod + MELO 4 Tank Kit
Original Eleaf iKunn i80 80W 3000mAh TC VW Variable Wattage Box Mod + MELO 4 Tank Kit $40.69
Mod: The Eleaf iKuun i80 features an innovative temperature protection system of charging that highly secures the safety of charging process (Temperature range for charging is -5~50'C or 23~122'F). This compact e-cigarette box mod skillfully packs a big 0.91 inch screen with an internal sustainable 3000mAh battery in a unit. Compact yet powerful, it is capable of outputting a max power of 80 watts and has a big fire bar for added convenience. Its 2A quick charge capability along with an easily accessible charging port allows for fast and convenient charging.This item also has many color and rated parameters to choose. Tank: The MELO 4 atomizer features an all-new EC2 series coil which is the upgraded version based on original popular EC coils, bringing you ultimate vaping experience with nice flavor. The retractable top fill system makes it really easy to fill the tank. You just need to slide the drip tip back and it reveals the fill port. The dual large air inlets allow optimal airflow for great vapor production.This item also has rated parameters to choose.
Mod: The Eleaf iKuun i80 features an innovative temperature protection system of charging that highly secures the safety of charging process (Temperature range for charging is -5~50'C or 23~122'F). This compact e-cigarette box mod skillfully packs a big 0.91 inch screen with an internal sustainable 3000mAh battery in a unit. Compact yet powerful, it is capable of outputting a max power of 80 watts and has a big fire bar for added convenience. Its 2A quick charge capability along with an easily accessible charging port allows for fast and convenient charging.This item also has many color and rated parameters to choose. Tank: The MELO 4 atomizer features an all-new EC2 series coil which is the upgraded version based on original popular EC coils, bringing you ultimate vaping experience with nice flavor. The retractable top fill system makes it really easy to fill the tank. You just need to slide the drip tip back and it reveals the fill port. The dual large air inlets allow optimal airflow for great vapor production.This item also has rated parameters to choose.
Original Eleaf MELO 4 Sub Ohm Tank Atomizer
Original Eleaf MELO 4 Sub Ohm Tank Atomizer $14.99
The MELO 4 atomizer features an all-new EC2 series coil which is the upgraded version based on original popular EC coils, bringing you ultimate vaping experience with nice flavor. The retractable top fill system makes it really easy to fill the tank. You just need to slide the drip tip back and it reveals the fill port. The dual large air inlets allow optimal airflow for great vapor production.This item also has many color and rated parameters to choose.
The MELO 4 atomizer features an all-new EC2 series coil which is the upgraded version based on original popular EC coils, bringing you ultimate vaping experience with nice flavor. The retractable top fill system makes it really easy to fill the tank. You just need to slide the drip tip back and it reveals the fill port. The dual large air inlets allow optimal airflow for great vapor production.This item also has many color and rated parameters to choose.
Original Eleaf iKunn i80 80W 3000mAh TC VW Variable Wattage Box Mod + MELO 4 Tank Kit
Original Eleaf iKunn i80 80W 3000mAh TC VW Variable Wattage Box Mod + MELO 4 Tank Kit $30.99
The Eleaf iKuun i80 features an innovative temperature protection system of charging that highly secures the safety of charging process (Temperature range for charging is -5~50'C or 23~122'F). This compact e-cigarette box mod skillfully packs a big 0.91 inch screen with an internal sustainable 3000mAh battery in a unit. Compact yet powerful, it is capable of outputting a max power of 80 watts and has a big fire bar for added convenience. Its 2A quick charge capability along with an easily accessible charging port allows for fast and convenient charging.This item also has many color and rated parameters to choose.
The Eleaf iKuun i80 features an innovative temperature protection system of charging that highly secures the safety of charging process (Temperature range for charging is -5~50'C or 23~122'F). This compact e-cigarette box mod skillfully packs a big 0.91 inch screen with an internal sustainable 3000mAh battery in a unit. Compact yet powerful, it is capable of outputting a max power of 80 watts and has a big fire bar for added convenience. Its 2A quick charge capability along with an easily accessible charging port allows for fast and convenient charging.This item also has many color and rated parameters to choose.
Original Eleaf iKunn i200 200W 4600mAh TC VW Variable Wattage Box Mod
Original Eleaf iKunn i200 200W 4600mAh TC VW Variable Wattage Box Mod $32.79
The Eleaf iKuun i200 features an innovative temperature protection system for charging that highly secures the safety of charging process (Temperature range for charging is -5~50'C or 23~122'F). Powered by an internal battery, this e-cigarette box mod is capable of outputting a max power of 200 watts, allowing a great vaping experience with huge vapor production. It also comes with a big 0.96 inch screen that offers an all-new concise interface and has 2A quick charge capacity.This item also has many color and rated parameters to choose.
The Eleaf iKuun i200 features an innovative temperature protection system for charging that highly secures the safety of charging process (Temperature range for charging is -5~50'C or 23~122'F). Powered by an internal battery, this e-cigarette box mod is capable of outputting a max power of 200 watts, allowing a great vaping experience with huge vapor production. It also comes with a big 0.96 inch screen that offers an all-new concise interface and has 2A quick charge capacity.This item also has many color and rated parameters to choose.
Wednesday, July 19, 2017
510 Drip Tip for RDA / RTA / Sub Ohm Tank Atomizer
510 Drip Tip for RDA / RTA / Sub Ohm Tank Atomizer $3.99
The 510 drip tip is made from PEEK material. It measures about 11mm in outer diameter and 13mm in height. The inner diameter is about 0.3mm. It is great for tasting denser flavor.
The 510 drip tip is made from PEEK material. It measures about 11mm in outer diameter and 13mm in height. The inner diameter is about 0.3mm. It is great for tasting denser flavor.
Battle Multi-functional Carrying Storage Bag Clone for E-cigarette
Battle Multi-functional Carrying Storage Bag Clone for E-cigarette $8.99
The Battle Multi-functional Carrying Storage Bag Clone is a bag for you to carry vaping devices or DIY tools on the go. This durable, practical, portable bag is a good choice for all vapors. The mod kit on the image is not included, for display only.This item also has many color to choose.
The Battle Multi-functional Carrying Storage Bag Clone is a bag for you to carry vaping devices or DIY tools on the go. This durable, practical, portable bag is a good choice for all vapors. The mod kit on the image is not included, for display only.This item also has many color to choose.
Replacement Tank Sleeve + Drip Tip Kit for SMOK TFV12 Tank
Replacement Tank Sleeve + Drip Tip Kit for SMOK TFV12 Tank $5.99
The replacement tank sleeve and drip tip are made from resin. They are specially designed for SMOK TFV12 tank. The juice capacity will raised to 7.5ml by using this tank sleeve. It is great to customize your TFV12 tank and make it different. The tank on the image is not included, for display only.This item also has many color to choose.
The replacement tank sleeve and drip tip are made from resin. They are specially designed for SMOK TFV12 tank. The juice capacity will raised to 7.5ml by using this tank sleeve. It is great to customize your TFV12 tank and make it different. The tank on the image is not included, for display only.This item also has many color to choose.
Replacement Tank Sleeve + Drip Tip Kit for SMOK TFV8 Tank
Replacement Tank Sleeve + Drip Tip Kit for SMOK TFV8 Tank $5.99
The replacement tank sleeve and drip tip are made from resin. They are specially designed for SMOK TFV8 tank. The juice capacity will raised to 7.5ml by using this tank sleeve. It is great to customize your TFV8 tank and make it different. The tank on the image is not included, for display only.This item also has many color to choose.
The replacement tank sleeve and drip tip are made from resin. They are specially designed for SMOK TFV8 tank. The juice capacity will raised to 7.5ml by using this tank sleeve. It is great to customize your TFV8 tank and make it different. The tank on the image is not included, for display only.This item also has many color to choose.
Replacement Tank Sleeve + Drip Tip Kit for SMOK TFV8 Big Baby Tank
Replacement Tank Sleeve + Drip Tip Kit for SMOK TFV8 Big Baby Tank $5.99
The replacement tank sleeve and drip tip are made from resin. They are specially designed for SMOK TFV8 Big Baby tank. The juice capacity will raised to 7.5ml by using this tank sleeve. It is great to customize your TFV8 Big Baby tank and make it different. The tank on the image is not included, for display only.This item also has many color to choose.
The replacement tank sleeve and drip tip are made from resin. They are specially designed for SMOK TFV8 Big Baby tank. The juice capacity will raised to 7.5ml by using this tank sleeve. It is great to customize your TFV8 Big Baby tank and make it different. The tank on the image is not included, for display only.This item also has many color to choose.
Complyfe Bolt Mechanical Mod Clone + Battle RDA Kit Clone
Complyfe Bolt Mechanical Mod Clone + Battle RDA Kit Clone $21.99
Mod: The Bolt Mechanical Mod Clone is constructed from brass in 24mm diameter. It is powered by 1 x 18650 battery (not included). It comes with 5 vent holes on the top side and magnetic bottom firing button.This item also has many color to choose. RDA: The Battle RDA Clone is constructed from aluminum cap and stainless steel deck. The Battle style RDA comes with triple-post deck design. Features 24mm diameter, large build deck, this Battle style RDA is a good choice for cloud chasing enthusiasts!
Mod: The Bolt Mechanical Mod Clone is constructed from brass in 24mm diameter. It is powered by 1 x 18650 battery (not included). It comes with 5 vent holes on the top side and magnetic bottom firing button.This item also has many color to choose. RDA: The Battle RDA Clone is constructed from aluminum cap and stainless steel deck. The Battle style RDA comes with triple-post deck design. Features 24mm diameter, large build deck, this Battle style RDA is a good choice for cloud chasing enthusiasts!
Original Hcigar VT Inbox 75W TC VW Varible Wattage Box Mod + Maze V1.1 22mm RDA
Original Hcigar VT Inbox 75W TC VW Varible Wattage Box Mod + Maze V1.1 22mm RDA $79.99
Mod: The Original Hcigar VT Inbox 75W TC VW Box Mod is powered by Evolv DNA75 chip from USA, making it easy to operate and the maximum output can reach to 75W. Using single high-rate 18650 battery, it can be charged directly via USB or replacing the battery to achieve duration. The USB port is not only for charging, but also for connecting to computer to customize through Escribe software. VT Inbox is also squonk-friendly with inner 8ml bottom feeder bottle.This item also has many color,pattern and materials to choose. RDA: The Maze V1.1 RDA is a 22mm diameter atomizer with double types of adjustable airflow. The small holes on the top cap inlet the air and through convection circulation make the fog softer. The wide slots on the bottom side make the fog stronger. It also features two posts velocity style build deck for single or dual coils.
Mod: The Original Hcigar VT Inbox 75W TC VW Box Mod is powered by Evolv DNA75 chip from USA, making it easy to operate and the maximum output can reach to 75W. Using single high-rate 18650 battery, it can be charged directly via USB or replacing the battery to achieve duration. The USB port is not only for charging, but also for connecting to computer to customize through Escribe software. VT Inbox is also squonk-friendly with inner 8ml bottom feeder bottle.This item also has many color,pattern and materials to choose. RDA: The Maze V1.1 RDA is a 22mm diameter atomizer with double types of adjustable airflow. The small holes on the top cap inlet the air and through convection circulation make the fog softer. The wide slots on the bottom side make the fog stronger. It also features two posts velocity style build deck for single or dual coils.
Limitless Hextron RTA Rebuildable Tank Atomizer Clone
Limitless Hextron RTA Rebuildable Tank Atomizer Clone $11.99
The Limitless Hextron RTA Rebuildable Tank Atomizer Clone is constructed from stainless steel in 24mm diameter. The glass tank can hold 2.8ml e-juice. It features threaded chuf cap for top fill access and adjustable bottom airflow control system. The RTA comes with 0.5ohm coil with integrated bottom airflow.This item also has many color to choose.
The Limitless Hextron RTA Rebuildable Tank Atomizer Clone is constructed from stainless steel in 24mm diameter. The glass tank can hold 2.8ml e-juice. It features threaded chuf cap for top fill access and adjustable bottom airflow control system. The RTA comes with 0.5ohm coil with integrated bottom airflow.This item also has many color to choose.
Original Wotofo Freakshow V2 RDA Rebuildable Dripping Atomizer
Original Wotofo Freakshow V2 RDA Rebuildable Dripping Atomizer $18.99
The Original Wotofo Freakshow RDA V2 25mm is following on in the footsteps of the original Freakshow. The V2 Still retains the awesome under coil airflow that the original freakshow had but now with the addition of added side airflow if needed. The deck has also changed to a dual-post Velocity style deck ideal for dual coil setups. So the Freakshow V2 RDA is very capable of satisfying both flavor chasers and cloud chasers.
The Original Wotofo Freakshow RDA V2 25mm is following on in the footsteps of the original Freakshow. The V2 Still retains the awesome under coil airflow that the original freakshow had but now with the addition of added side airflow if needed. The deck has also changed to a dual-post Velocity style deck ideal for dual coil setups. So the Freakshow V2 RDA is very capable of satisfying both flavor chasers and cloud chasers.
AV Able XL Hybrid Mechanical Mod Clone
AV Able XL Hybrid Mechanical Mod Clone $17.99
The Avid Lyfe Able XL Mechanical Mod Clone is constructed from brass (mod) and Carbon fiber (sleeve) in 24mm diameter. It features 510 hybrid connection and knurled top hat and button. The bottom fire button contains opposite magnets. The contact is made from copper for better conduction. The mod is powered by 1 x 18650 battery (not included).This item also has many color and materials to choose.
The Avid Lyfe Able XL Mechanical Mod Clone is constructed from brass (mod) and Carbon fiber (sleeve) in 24mm diameter. It features 510 hybrid connection and knurled top hat and button. The bottom fire button contains opposite magnets. The contact is made from copper for better conduction. The mod is powered by 1 x 18650 battery (not included).This item also has many color and materials to choose.
Tuesday, July 18, 2017
Original Joyetech Cuboid Pro 200W TC VW Varible Wattage Box Mod + ProCore Aries Tank Kit
Original Joyetech Cuboid Pro 200W TC VW Varible Wattage Box Mod + ProCore Aries Tank Kit $90.99
Introducing the most advanced and powerful box mod with a large 2.4 inch TFT color display. Featuring an easy-to-access menu system on a fully responsive touch screen, the CUBOID Pro presents all the vaping essentials as well as some unique cool features like changeable wallpaper, pedometer, preheat, reverse charging and over time protection. The ProCore Aries atomizer has an innovative flip-to-open top-fill system, allowing to refill the e-juice with great ease. ProC series heads provides plenty of options, from mouth to lung inhale to direct lung inhale, from massive vapor production to optimal flavor. Powered by dual 18650 batteries (not included), the CUBOID Pro applies a sophisticated temperature control suite coupled with a 200W maximum output.This item also has many color to choose.
Introducing the most advanced and powerful box mod with a large 2.4 inch TFT color display. Featuring an easy-to-access menu system on a fully responsive touch screen, the CUBOID Pro presents all the vaping essentials as well as some unique cool features like changeable wallpaper, pedometer, preheat, reverse charging and over time protection. The ProCore Aries atomizer has an innovative flip-to-open top-fill system, allowing to refill the e-juice with great ease. ProC series heads provides plenty of options, from mouth to lung inhale to direct lung inhale, from massive vapor production to optimal flavor. Powered by dual 18650 batteries (not included), the CUBOID Pro applies a sophisticated temperature control suite coupled with a 200W maximum output.This item also has many color to choose.
Original Oumier Maximus Max RDTA Rebuildable Dripping Tank Atomizer
Original Oumier Maximus Max RDTA Rebuildable Dripping Tank Atomizer $20.79
The 24mm Maximus Max RDTA features an innovative square liquid guiding hole pairing with top central hole filling, a precise airflow design for three different adjusting modes, a large post deck for single or dual coil building, a 3ml Juice capacity with wide wicking area and deep saturation. All parts are detachable and with the maximum convenient in coil building. Comes with a PEI drip tip (suitable for 810 drip tip) with excellent heat insulation.
The 24mm Maximus Max RDTA features an innovative square liquid guiding hole pairing with top central hole filling, a precise airflow design for three different adjusting modes, a large post deck for single or dual coil building, a 3ml Juice capacity with wide wicking area and deep saturation. All parts are detachable and with the maximum convenient in coil building. Comes with a PEI drip tip (suitable for 810 drip tip) with excellent heat insulation.
Apocalypse Mechlyfe RDA Clone Rebuildable Dripping Atomizer w/ BF Pin
Apocalypse Mechlyfe RDA Clone Rebuildable Dripping Atomizer w/ BF Pin $7.99
The Apocalypse Mechlyfe RDA Clone is constructed from stainless steel in 24mm diameter. It features a large build deck for easy coil building, with two post design and oversized bridge clamp. The RDA features dual air slots on the sleeve and teardrop shape slots on the inner side of top cap for adjustable airflow. It comes with a 810 wide bore drip tip. This RDA comes with bottom feeder pin.This item also has many color to choose.
The Apocalypse Mechlyfe RDA Clone is constructed from stainless steel in 24mm diameter. It features a large build deck for easy coil building, with two post design and oversized bridge clamp. The RDA features dual air slots on the sleeve and teardrop shape slots on the inner side of top cap for adjustable airflow. It comes with a 810 wide bore drip tip. This RDA comes with bottom feeder pin.This item also has many color to choose.
Original Asvape Strider 75W TC VW Variable Wattage Box Mod
Original Asvape Strider 75W TC VW Variable Wattage Box Mod $118.00
The Original Asvape Strider 75W Box Mod adopts the latest American VO 75 chip, supports power output from 5W to 75W. Strider supports variable power curve (VPC), Power, TC and BYPASS modes. The Mod is powered by one 26650 or 18650 battery (with battery adapter), which is very flexible for your vaping. This mod will be shipped in random color. More options than what's on the image.This item also has many color to choose.
The Original Asvape Strider 75W Box Mod adopts the latest American VO 75 chip, supports power output from 5W to 75W. Strider supports variable power curve (VPC), Power, TC and BYPASS modes. The Mod is powered by one 26650 or 18650 battery (with battery adapter), which is very flexible for your vaping. This mod will be shipped in random color. More options than what's on the image.This item also has many color to choose.
Cutthroat Edition Consvr Hybrid Mechanical Mod Clone
Cutthroat Edition Consvr Hybrid Mechanical Mod Clone $19.99
The Cutthroat Edition Consvr Mechanical Mod Clone is constructed from brass in 25mm diameter. It features 510 hybrid top cap, hourglass groove, rare earth magnet button and unique floating ball contact pin. It is powered by 1 x b18650 battery (not included).This item also has many color to choose.
The Cutthroat Edition Consvr Mechanical Mod Clone is constructed from brass in 25mm diameter. It features 510 hybrid top cap, hourglass groove, rare earth magnet button and unique floating ball contact pin. It is powered by 1 x b18650 battery (not included).This item also has many color to choose.
Original Joyetech Cuboid Pro 200W TC VW Varible Wattage Box Mod + ProCore Aries Tank Kit
Original Joyetech Cuboid Pro 200W TC VW Varible Wattage Box Mod + ProCore Aries Tank Kit $73.99
Introducing the most advanced and powerful box mod with a large 2.4 inch TFT color display. Featuring an easy-to-access menu system on a fully responsive touch screen, the CUBOID Pro presents all the vaping essentials as well as some unique cool features like changeable wallpaper, pedometer, preheat, reverse charging and over time protection. Powered by dual 18650 batteries (not included), the CUBOID Pro applies a sophisticated temperature control suite coupled with a 200W maximum output.This item also has many color to choose.
Introducing the most advanced and powerful box mod with a large 2.4 inch TFT color display. Featuring an easy-to-access menu system on a fully responsive touch screen, the CUBOID Pro presents all the vaping essentials as well as some unique cool features like changeable wallpaper, pedometer, preheat, reverse charging and over time protection. Powered by dual 18650 batteries (not included), the CUBOID Pro applies a sophisticated temperature control suite coupled with a 200W maximum output.This item also has many color to choose.
Original Asvape Strider 75W TC VW Variable Wattage Box Mod - Random Color, Stable Wood
Original Asvape Strider 75W TC VW Variable Wattage Box Mod - Random Color, Stable Wood $250.00
The Original Asvape Strider 75W Box Mod adopts the latest American VO 75 chip, supports power output from 5W to 75W. Strider supports variable power curve (VPC), Power, TC and BYPASS modes. The Mod is powered by one 26650 or 18650 battery (with battery adapter), which is very flexible for your vaping. This mod will be shipped in random color. More options than what's on the image.
The Original Asvape Strider 75W Box Mod adopts the latest American VO 75 chip, supports power output from 5W to 75W. Strider supports variable power curve (VPC), Power, TC and BYPASS modes. The Mod is powered by one 26650 or 18650 battery (with battery adapter), which is very flexible for your vaping. This mod will be shipped in random color. More options than what's on the image.
Monday, July 17, 2017
SXK E-Phenix Resurrection V2 RDA Rebuildable Dripping Atomizer Clone
SXK E-Phenix Resurrection V2 RDA Rebuildable Dripping Atomizer Clone $12.99 after add to cart
The SXK E-Phenix Resurrection V2 RDA Clone is constructed from 316 stainless steel in 22.5mm diameter. It is mini sized but can provide rich flavor. It features gold plated deck with triple posts. It comes with removable wide bore drip tip. The RDA comes with bottom feeder pin.This item also has double posts version to choose.
The SXK E-Phenix Resurrection V2 RDA Clone is constructed from 316 stainless steel in 22.5mm diameter. It is mini sized but can provide rich flavor. It features gold plated deck with triple posts. It comes with removable wide bore drip tip. The RDA comes with bottom feeder pin.This item also has double posts version to choose.
Original Advken Manta RTA Rebuildable Tank Atomizer
Original Advken Manta RTA Rebuildable Tank Atomizer $27.99 after add to cart
Introducing the new RTA from Advken, the Manta RTA is a 24mm diameter tank with 4.5ml capacity (3ml with spare tank sleeve). The special two-post design can be compatible with different types of wires. It also features convenient top filling, gold plated posts, and bottom adjustable airflow. Manta RTA comes with a PEI 810 wide bore drip tip.
Introducing the new RTA from Advken, the Manta RTA is a 24mm diameter tank with 4.5ml capacity (3ml with spare tank sleeve). The special two-post design can be compatible with different types of wires. It also features convenient top filling, gold plated posts, and bottom adjustable airflow. Manta RTA comes with a PEI 810 wide bore drip tip.
Original Asvape AIM-9 RDA Rebuildable Dripping Atomizer
Original Asvape AIM-9 RDA Rebuildable Dripping Atomizer $35.00
Original Asvape AIM-9 RDA is a 24mm diameter dripper with classic original column structure. Constructed from stainless steel, AIM-9 features dual-post design, PEEK insulator, and bottom adjustable airflow with fine-tuned, angled airflow channels for the leak resistance. The RDA comes with a wide bore drip tip.This item also has many color to choose.
Original Asvape AIM-9 RDA is a 24mm diameter dripper with classic original column structure. Constructed from stainless steel, AIM-9 features dual-post design, PEEK insulator, and bottom adjustable airflow with fine-tuned, angled airflow channels for the leak resistance. The RDA comes with a wide bore drip tip.This item also has many color to choose.
Original Wotofo Freakshow V2 RDA Rebuildable Dripping Atomizer
Original Wotofo Freakshow V2 RDA Rebuildable Dripping Atomizer $18.99
The Original Wotofo Freakshow RDA V2 25mm is following on in the footsteps of the original Freakshow. The V2 Still retains the awesome under coil airflow that the original freakshow had but now with the addition of added side airflow if needed. The deck has also changed to a dual-post Velocity style deck ideal for dual coil setups. So the Freakshow V2 RDA is very capable of satisfying both flavor chasers and cloud chasers.
The Original Wotofo Freakshow RDA V2 25mm is following on in the footsteps of the original Freakshow. The V2 Still retains the awesome under coil airflow that the original freakshow had but now with the addition of added side airflow if needed. The deck has also changed to a dual-post Velocity style deck ideal for dual coil setups. So the Freakshow V2 RDA is very capable of satisfying both flavor chasers and cloud chasers.
Complyfe Battle X RDA Rebuildable Dripping Atomizer Clone
Complyfe Battle X RDA Rebuildable Dripping Atomizer Clone $7.95
The Complyfe Battle X RDA Clone is constructed from aluminum (drip tip and sleeve) and stainless steel (base). It is 24mm in diameter with 510 connector. It features two posts deck for coil building and side airflow control. The RDA comes with a removable wide bore drip tip. This RDA is Glow-in-the-Dark (night shining).This item also has many color to choose(pure white included).
The Complyfe Battle X RDA Clone is constructed from aluminum (drip tip and sleeve) and stainless steel (base). It is 24mm in diameter with 510 connector. It features two posts deck for coil building and side airflow control. The RDA comes with a removable wide bore drip tip. This RDA is Glow-in-the-Dark (night shining).This item also has many color to choose(pure white included).
Complyfe Battle RDA Rebuildable Dripping Atomizer Clone
Complyfe Battle RDA Rebuildable Dripping Atomizer Clone $7.95
The Complyfe Battle RDA Clone is constructed from aluminum (drip tip and sleeve) and stainless steel (base). It is 24mm in diameter with 510 connector. It features two posts deck for coil building and side airflow control. The RDA comes with a removable wide bore drip tip. This RDA is Glow-in-the-Dark (night shining).This item also has many color to choose(pure white included).
The Complyfe Battle RDA Clone is constructed from aluminum (drip tip and sleeve) and stainless steel (base). It is 24mm in diameter with 510 connector. It features two posts deck for coil building and side airflow control. The RDA comes with a removable wide bore drip tip. This RDA is Glow-in-the-Dark (night shining).This item also has many color to choose(pure white included).
Original SOOMOOK FF91 200W TC VW Variable Wattage Box Mod
Original SOOMOOK FF91 200W TC VW Variable Wattage Box Mod $35.99
Original SOOMOOK FF91 TC VW Mod is a powerful temperature controal variable wattage mod. Powered by 2 x 18650 battery (not included), SOOMOOK FF91 can reach for maximum 200W. With 0.96" OLED display screen, you can know all vaping data clearly. Working modes includes TC-Ni, TC-Ti, TC-SS, Power, Bypass mode. It would be a good choice for your joyful vaping.This item also has many color to choose.
Original SOOMOOK FF91 TC VW Mod is a powerful temperature controal variable wattage mod. Powered by 2 x 18650 battery (not included), SOOMOOK FF91 can reach for maximum 200W. With 0.96" OLED display screen, you can know all vaping data clearly. Working modes includes TC-Ni, TC-Ti, TC-SS, Power, Bypass mode. It would be a good choice for your joyful vaping.This item also has many color to choose.
AV Lyfe Dimple Hybrid Mechanical Mod Clone
AV Lyfe Dimple Hybrid Mechanical Mod Clone $19.99
The AV Lyfe Dimple Hybrid Mechanical Mod Clone is constructed from aluminum. The Dimple style mechanical mod is powered by 1 x 18650 battery (not included). Comes with the unique twisted shape, this mod will bring an amazing vaping experience to your vaping life! This mechanical mod is Glow-in-the-Dark (night shining).This item also has many color to choose(pure white included).
The AV Lyfe Dimple Hybrid Mechanical Mod Clone is constructed from aluminum. The Dimple style mechanical mod is powered by 1 x 18650 battery (not included). Comes with the unique twisted shape, this mod will bring an amazing vaping experience to your vaping life! This mechanical mod is Glow-in-the-Dark (night shining).This item also has many color to choose(pure white included).
Swiss Hybrid Mechanical Mod Clone
Swiss Hybrid Mechanical Mod Clone $19.99
The Swiss Mechanical Modd Clone is made from aluminum and powered by 1 x 18650 battery (not included). The fixed 510 hybrid top is machined into the mod for enhanced conductivity. It comes with spring bottom fir button. This mechanical mod is Glow-in-the-Dark (night shining).This item also has many color to choose(pure white included).
The Swiss Mechanical Modd Clone is made from aluminum and powered by 1 x 18650 battery (not included). The fixed 510 hybrid top is machined into the mod for enhanced conductivity. It comes with spring bottom fir button. This mechanical mod is Glow-in-the-Dark (night shining).This item also has many color to choose(pure white included).
Sunday, July 16, 2017
Original Aweite AWT 26650 4500mAh 3.7V 75A High Drain Rechargeable Battery
Original Aweite AWT 26650 4500mAh 3.7V 75A High Drain Rechargeable Battery $19.99
The Original Aweite AWT 26650 Battery, featuring a diameter of 26mm and a length of 65mm, has a 4500mAh large battery capacity with 75A max continuous discharging current. Long storage life and high energy density. This product comes with two (2) pieces in one pack.
The Original Aweite AWT 26650 Battery, featuring a diameter of 26mm and a length of 65mm, has a 4500mAh large battery capacity with 75A max continuous discharging current. Long storage life and high energy density. This product comes with two (2) pieces in one pack.
Original SJMY Super Soft Bottom Feeder Bottle for BF Squonk Mods
Original SJMY Super Soft Bottom Feeder Bottle for BF Squonk Mods $6.99
The Original SJMY Bottom Feeder Bottle is made from food grade silicone and the top cap is made from stainless steel. It feels super soft and smooth. The bottle holds about 6ml of e-juice and it is universal suitable for BF squonk mods in the market.This item also has many color to choose.
The Original SJMY Bottom Feeder Bottle is made from food grade silicone and the top cap is made from stainless steel. It feels super soft and smooth. The bottle holds about 6ml of e-juice and it is universal suitable for BF squonk mods in the market.This item also has many color to choose.
Original SMOKTech SMOK Procolor 225W TC VW Variable Wattage Mod + TFV8 Big Baby Tank Kit
Original SMOKTech SMOK Procolor 225W TC VW Variable Wattage Mod + TFV8 Big Baby Tank Kit $65.99
The ProColor kit comes with the ProColor 225 wattage mod, which has the industrys leading design and new features. It has RGB backlights shaped like a shield and a super large OLED colorful screen of 1.3 inch with high definition. Besides, it owns a totally new designed software interface, a fire bar of ergonomic hand feel design, and the included sub ohm tank is the world famous and beloved TFV8 big baby tank. All of these features will show you perfect self, innovation keeps changing the vaping experience! This mod kit is EU edition with 2ml TFV8 Big Baby Tank.This item also has many color to choose.
The ProColor kit comes with the ProColor 225 wattage mod, which has the industrys leading design and new features. It has RGB backlights shaped like a shield and a super large OLED colorful screen of 1.3 inch with high definition. Besides, it owns a totally new designed software interface, a fire bar of ergonomic hand feel design, and the included sub ohm tank is the world famous and beloved TFV8 big baby tank. All of these features will show you perfect self, innovation keeps changing the vaping experience! This mod kit is EU edition with 2ml TFV8 Big Baby Tank.This item also has many color to choose.
Kennedy V5 RDA Rebuildable Dripping Atomizer Clone with BF Pin
Kennedy V5 RDA Rebuildable Dripping Atomizer Clone with BF Pin $20.99
The Kennedy V5 RDA Clone is constructed from titanium in 24mm diameter. The RDA comes with dual adjustable airflow. The adjustable top cap and four top air slots work as top airflow system, and the dual bottom air slots work as bottom airflow system. The two post deck is friendly, with enough space for building coils more easily. This RDA comes with bottom feeder pin.This item also has another material to choose.
The Kennedy V5 RDA Clone is constructed from titanium in 24mm diameter. The RDA comes with dual adjustable airflow. The adjustable top cap and four top air slots work as top airflow system, and the dual bottom air slots work as bottom airflow system. The two post deck is friendly, with enough space for building coils more easily. This RDA comes with bottom feeder pin.This item also has another material to choose.
Original YouDe UD Bellus V2 RDTA Rebuildable Dripping Tank Atomizer
Original YouDe UD Bellus V2 RDTA Rebuildable Dripping Tank Atomizer $29.99
Base on the YouDe UD Bellus RTA, the Authentic YouDe UD Bellus V2 RDTA is a combination of RDA and RTA. It features 5ml e-juice capacity and innovative spiral airflow design, bringing you pure flavor and joyful vaping experience. The base features two posts design and 18mm wide build deck, making it easy to build single or dual coils.This item also has many color to choose.
Base on the YouDe UD Bellus RTA, the Authentic YouDe UD Bellus V2 RDTA is a combination of RDA and RTA. It features 5ml e-juice capacity and innovative spiral airflow design, bringing you pure flavor and joyful vaping experience. The base features two posts design and 18mm wide build deck, making it easy to build single or dual coils.This item also has many color to choose.
Original IJOY Captain RTA Rebuildable Tank Atomizer
Original IJOY Captain RTA Rebuildable Tank Atomizer $23.99
The IJOY Captain RTA is a very personalized RTA atomizer, with a similar nice appearance of the Captain sub ohm tank, characterized by a diameter of 25mm and a capacity of 3.8ml, innovative postless deck design. Due to the lack of posts frees up build space to accommodate a wide range of coil structures and complex configurations. The quick sliding top fill design makes filling easier, plus by juice flow control, feel full of pleasure with airflow and cloud vapor. What's more, the silicon gasket of fill part can be replaced which increases of service life.This item also has many color to choose.
The IJOY Captain RTA is a very personalized RTA atomizer, with a similar nice appearance of the Captain sub ohm tank, characterized by a diameter of 25mm and a capacity of 3.8ml, innovative postless deck design. Due to the lack of posts frees up build space to accommodate a wide range of coil structures and complex configurations. The quick sliding top fill design makes filling easier, plus by juice flow control, feel full of pleasure with airflow and cloud vapor. What's more, the silicon gasket of fill part can be replaced which increases of service life.This item also has many color to choose.
Original IJOY Captain S Sub Ohm Tank Atomizer
Original IJOY Captain S Sub Ohm Tank Atomizer $22.99
The IJOY Captain S Sub Ohm Tank features a specially designed groove located below the juice reservoir and right above the coil placement. This result in a reduction in heat transmission route and helps prevent the entire structure from heating up during extended use. And a new thread-less coil system for easy coil replacement. The Captain S sub ohm Tank is conveniently filled via the sliding top cap. Bring you the smoothest airflow and the best flavor!This item also has many color to choose.
The IJOY Captain S Sub Ohm Tank features a specially designed groove located below the juice reservoir and right above the coil placement. This result in a reduction in heat transmission route and helps prevent the entire structure from heating up during extended use. And a new thread-less coil system for easy coil replacement. The Captain S sub ohm Tank is conveniently filled via the sliding top cap. Bring you the smoothest airflow and the best flavor!This item also has many color to choose.
Original SMOKTech SMOK Procolor 225W TC VW Variable Wattage Box Mod
Original SMOKTech SMOK Procolor 225W TC VW Variable Wattage Box Mod $49.99
The ProColor kit comes with the ProColor 225 wattage mod, which has the industrys leading design and new features. It has RGB backlights shaped like a shield and a super large OLED colorful screen of 1.3 inch with high definition. Besides, it owns a totally new designed software interface, a fire bar of ergonomic hand feel design. The max output power of ProColor can reach up to 225W, and provides two modes for you. Temp Mode can enhance consistency and taste of every puff. Watt Mode is perfect for cloud chasing.This item also has many color to choose.
The ProColor kit comes with the ProColor 225 wattage mod, which has the industrys leading design and new features. It has RGB backlights shaped like a shield and a super large OLED colorful screen of 1.3 inch with high definition. Besides, it owns a totally new designed software interface, a fire bar of ergonomic hand feel design. The max output power of ProColor can reach up to 225W, and provides two modes for you. Temp Mode can enhance consistency and taste of every puff. Watt Mode is perfect for cloud chasing.This item also has many color to choose.
Saturday, July 15, 2017
Heat Insulation Ring for E-cigarette Mod and Atomizer
$0.99
This Heat Insulation Ring is made from PC material. It is installed between mod and atomizer to prevent leaking and being screwed tightly. It is also used to insulate heat between mod and atomizer, and it can be a decorative ring for your device.The inner diameter is 24.5mm.
This Heat Insulation Ring is made from PC material. It is installed between mod and atomizer to prevent leaking and being screwed tightly. It is also used to insulate heat between mod and atomizer, and it can be a decorative ring for your device.The inner diameter is 24.5mm.
VGOD Elite Hybrid Mechanical Mod + VGod TrickTank Pro RDTA Kit Clone
$26.99
Mod:The VGOD Elite Mechanical Mod Clone features a ""flare grip"" chassis with hard hitting copper construction. A 510 hybrid connection, copper contact, along with a copper framed aerospace grade carbon fiber switch, ensures you get the maximum voltage performance and look good while doing it.
Tank:The TRICKTANK PRO RDTA Clone Features a large dual post style rebuildable deck for easy dual coil installation. The RDTA also features a 4ml e-Juice Capacity with a convenient side fill hole and large dual airflow channels.
Mod:The VGOD Elite Mechanical Mod Clone features a ""flare grip"" chassis with hard hitting copper construction. A 510 hybrid connection, copper contact, along with a copper framed aerospace grade carbon fiber switch, ensures you get the maximum voltage performance and look good while doing it.
Tank:The TRICKTANK PRO RDTA Clone Features a large dual post style rebuildable deck for easy dual coil installation. The RDTA also features a 4ml e-Juice Capacity with a convenient side fill hole and large dual airflow channels.
Original SMOKTech SMOK Priv V8 60W Box Mod + TFV8 Baby Tank Kit
$33.99
The Smok PRIV V8 Kit includes a PRIV V8 mod and a TFV8 baby tank. The Priv V8 mod is attractive by two colored combination. It is designed with a big far button and uses a removable 18650 battery as the power source; it features simple, one-button activation. The included TFV8 Baby thank has 3ml e-liquid capacity and it is compatible with traditional Baby Beast Coils.Many colors for you to choose.
The Smok PRIV V8 Kit includes a PRIV V8 mod and a TFV8 baby tank. The Priv V8 mod is attractive by two colored combination. It is designed with a big far button and uses a removable 18650 battery as the power source; it features simple, one-button activation. The included TFV8 Baby thank has 3ml e-liquid capacity and it is compatible with traditional Baby Beast Coils.Many colors for you to choose.
Original Sigelei Compak F1 40W 2000mAh All-in-One Mod Kit
$33.99
Sigelei Compak F1 Mod Kit is an easy-to-use starter kit with 2000mAh built-in battery and 2ml tank. It features large firing button and the rubber-oil material can create an ideal feel in your hand.Click in to choose your favorite color.
Sigelei Compak F1 Mod Kit is an easy-to-use starter kit with 2000mAh built-in battery and 2ml tank. It features large firing button and the rubber-oil material can create an ideal feel in your hand.Click in to choose your favorite color.
Original Vivakita Fusion II 50W 2100mAh All-in-One Fusion 2 Mod Kit
$39.99
Fusion II is a great pocket sized product with a built-in 2ml tank and 2100 mAh battery. To optimize the taste of every puff according to your personal preference, the output wattage is easily adjustable between 7~50W, and every click is a 1W change.Several colors for you to choose.
Fusion II is a great pocket sized product with a built-in 2ml tank and 2100 mAh battery. To optimize the taste of every puff according to your personal preference, the output wattage is easily adjustable between 7~50W, and every click is a 1W change.Several colors for you to choose.
Original Augvape Druga RDA
Original Augvape Druga RDA Rebuildable Dripping Atomizer $26.99 after add to cart
The Original Augvape DRUGA RDA Rebuildable Dripping Atomizer is a design that we have not seen before in RDA and probably in most atomizers engineering. DRUGA RDA is the first atomizer which uses CSS (Clamp Snag System) for it dual posts to make your coils installation easy peasy and it allows for a wider variety of coil structure compatibility.Many colors for you to choose.
The Original Augvape DRUGA RDA Rebuildable Dripping Atomizer is a design that we have not seen before in RDA and probably in most atomizers engineering. DRUGA RDA is the first atomizer which uses CSS (Clamp Snag System) for it dual posts to make your coils installation easy peasy and it allows for a wider variety of coil structure compatibility.Many colors for you to choose.
Subscribe to:
Posts (Atom)